Directed Video TV100 manual Battery Replacement, Precautions

8.-/--—Used in conjunction with the numeric buttons to select channels on the keyboard in units of 10. For example, to select channel 35, press -/-- then 3, then press 5 —then channel 35 is

selected.

BATTERY REPLACEMENT

NOTE: Before using remote after installation, remove the battery plastic protective slip.

Remote Controller

+ side Battery

Latch Battery Holder

1.Move the small latch to the right and slide out the battery holder.

2.Remove old battery and replace it with a new battery (CR2025) with the positive “+” sign facing as shown above.

3.Push battery holder back into its compartment until it is locked.

PRECAUTIONS

1.Properly dispose of used battery.

2.Do not misuse battery by shorting the positive “+” and negative “-” terminal or put it into fire.

Overheating may cause the battery to explode and cause a fire hazard.

3.If the remote is not to be used for a long period, remove the battery from the remote to prevent damage from battery leakage.

4.To avoid accidents, prevent children from playing with the battery.

© 2005 Directed Electronics, Inc. 9