Note: If you have forgotten your changed password, you can set a new one at any time by entering the factory default password 1369..
Factory default settings (“RESET“)
By using the reset function, the device can be changed back to the factory default settings. To use the reset function, please press the button REL on the device. Now the operating unit can be carefully detached towards the front and left. Now press the RESET button on the device with a thin, sharp object. The device will then be reset and turned off if required.
Note:
When the factory settings are restored, the clock and the stored radio stations will also be reset
TV OPERATIONS (TV function is for
Connect TV antenna as it is shown on electrical connection diagram.
Switch to TV mode
Press MODE button repeatedly to select the TV mode, and press BAND select TV system: PAL DK →PAL I→PAL BG→PAL M→PAL N→SCEAM DK→SCEAM BG→NTSC M
Auto tuning
1.Press 
/ 
cursor buttons on RC or ︱
/ 
buttons on panel or touchable screen to start auto search of available TV station in backward/forward direction. When the first available station is found searching will be stopped and the station found will be played. Press these buttons again to continue searching.
Manual tuning
Press and hold for 2 seconds / cursor buttons on RC or ︱ / | ︱ buttons |
on panel or touchable screen repeatedly to search the TV stations step by step. |
|
Auto preset memory
1.Press RPT/P.SCAN button on the RC or Press AS/PS button on panel to start auto tuning; the search range is the current TV frequency range. The stations found will be stored into the memory automatically.
2.Press this button again to stop auto searching.
Select the TV station
1.Press number buttons on the RC
Page