Encore electronic ENLTV-DVB-S manual Device Driver Installation

Page 6

ENLTV-DVB-S User’s Guide -

2.2 Device Driver Installation

Place the CD-ROM that came with the ENLTV-DVB-S in the CD-ROM drive. (Assuming that the ENLTV-DVB-S PCI TV Tuner card is properly installed to the computer’s PCI slot), then follow the on-screen installation guide below.

2.2.1Device driver installation for Windows XP

1.When the computer is powered on for the very first time during the setup, a message “Found New Hardware Wizard” dialogue box will appear on the screen. Please click “Cancel” button or directly go to next step.

2. Click “Setup Driver” button.

3. Click “Next” button to begin installation.

6

Image 6
Contents ENLTV-DVB-S User’s Notice Contents Package Contents IntroductionSystem Requirements Getting Started Connect ENLTV-DVB-SDevice Driver Installation Device driver installation for Windows XPENLTV-DVB-S User’s Guide ENLTV-DVB-S User’s Guide ENLTV-DVB-S User’s Guide Device driver installation for Windows Vista ENLTV-DVB-S User’s Guide Install the ENLTV-DVB-S utility software ENLTV-DVB-S User’s Guide Launch the Software Running the ENLTV-DVB-S for the first timeENLTV-DVB-S User’s Guide Record Video Using the Remote Control Installing BatteriesRemote controller functions Supporting Center ENLTV-DVB-S User’s Guide 2008/06/30 Version