USING THE 4X4 HDTV KVM MATRIX
1
2
3
4
Connect all the sources to the DVI inputs on the 4x4 HDTV KVM Matrix, using the supplied cables.
Connect the HDMI/DVI displays to the outputs on the 4x4 HDTV KVM Matrix.
Connect the 24VDC powersupply to the 4x4 HDTV KVM Matrix.
Controlling the 4x4 HDTV KVM Matrix using the
Pressing Buttons... | Switches... |
Display 1 to view Source 1, 2, 3, or 4 | |
Display 2 to view Source 1, 2, 3, or 4 | |
Display 3 to view Source 1, 2, 3, or 4 | |
Display 4 to view Source 1, 2, 3, or 4 |
*Note for computers connected to the 4x4 HDTV KVM Matrix - When your computer boots up, it looks for an EDID (extended display identification data) from the display to tell it what monitor is connected and what resolution to output. During boot up of the computer you should have ONLY one output selected to one input at a time so that the computer gets the EDID of the display that is selected. If you have multiple outputs selected to one computer, the computer will read the EDID of the last output selected to it. If all your displays are the same, or all displays are capable of running at the same resolution then this step does not matter.
4