Audio Connection to Optional Equipment
Connect the unit to your optional equipment for audio output.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the
DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.
Amplifier equipped with
Amplifier equipped with
Connect one of the unit DIGITAL AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the corresponding jack on your amplifier. Use an optional digital (OPTICAL O or COAXIAL X) audio cable.
Digital Multi-channel sound
A digital
/video receiver that supports one or more of the audio formats supported by your unit such as MPEG 2, Dolby Digital and DTS. Check the receiver manual and the logos on the front of the receiver.
Notes:
•If the audio format of the digital output does not match the capabilities of your receiver, the receiver produces a strong, distorted sound or no sound at all.
•Six Channel Digital Surround Sound via a digital connection can only be obtained if your receiver is equipped with a Digital
Introduction
Installation and Setup
Operation
Reference
11