
Getting Started
Necessary Setup Before Using the Player
Some setups are necessary for the player depending on the TV or other components to be connected.
For details on using the setup display, see page 32. For details on each setup display item, see pages 33 to 35.
For details to enjoy Dolby Digital Surround, see pages 36 to 41.
pIf the color system of the TV is PAL or DUAL
Since the color system of the unit is set to PAL, you can use the unit as it is.
pIf the color system of the TV is NTSC
To set the TV to NTSC, turn on the unit while pressing the ¸ button of the unit. To reset to PAL, turn off the unit and then turn on as described above.
pTo connect the player to a
In the setup display, set “TV TYPE” in “INITIAL SETUP 1” to “16:9”(default setting).
pTo connect the player to a normal TV
In the setup display, set “TV TYPE” in “INITIAL SETUP 1” to “4:3 LETTER BOX” or “4:3 PAN SCAN.” For details, see page 34.
pTo listen to the sound through speakers connected to an amplifier with a digital connector or to output the sound to a digital component such as a DAT or MD deck
When you play a DVD, set “DIGITAL OUT” in “INITIAL SETUP 2” to “PCM” in the setup display. This is default setting.
pTo enjoy Dolby Digital surround sound by connecting the player to an amplifier with 5.1 ch inputs
In the setup display, set “MODE” in “5.1 OUTPUT SETUP 2” to “OFF.” This is default setting. See page 36 to hookup the speaker system and page 38 to set each speaker position or distance etc.
pTo connect the player to an audio component with a
In the setup display, set “DIGITAL OUT” in “INITIAL SETUP 2” to “DOLBY DIGITAL/PCM.”
Use the setup display to change the various settings for the picture and sound.
For details, see page 32.
To enjoy surround sound with front speakers only, set “MODE” in “5.1 OUTPUT SETUP 2” to “VES A” or “VES B.” You can enjoy surround sound through both the LINE OUT (AUDIO 1, 2) and FRONT (L/R) of the 5.1 OUTPUT connectors. See page 40 for details.
Selecting the Language for On-screen Display
You can select the language for the setup display or the messages displayed on the screen. Default setting is “ENGLISH.”
SET UP
ENTER
?/>/.//
1Press SET UP and select “” using ?//, and then press ENTER.
1 | 2 | 1 | 2 |
LANGUAGE | SETUP |
|
|
OSD:ENGLISH
DVD MENU:ENGLISH
AUDIO:ORIGINAL
SUBTITLE: AUDIO FOLLOW
2Select “OSD” using >/., then press /or ENTER.
1 | 2 | 1 | 2 |
LANGUAGE | SETUP |
|
|
OSD:ENGLISH
DVD MENU:CHINESE
AUDIO:ORIGINAL
SUBTITLE: AUDIO FOLLOW
3Select the language you want using >/., then press ENTER.
To cancel using the setup display on the way
Press SET UP.
Note
The languages you can select are the ones displayed in step 2. For details, see page 33.
9EN