Technicolor - Thomson DPL906VD_EN manual Additional Information, Troubleshooting

Page 19

DPL906VD_EN 12/08/05 9:54 Page 19

Additional Information

Troubleshooting

The appliance does not switch on.

Make sure it is plugged into a mains socket.

Press the STANDBY/ON button on the remote control or on the front of the appliance.

It is impossible to read the disc.

Insert the disc with the printed side facing up.

Check that the disc can actually be played by this device (see page 21).

If you are trying to play a disc containing JPEG files, check that the files have a resolution of less 5,120 x 3,840 pixels.

Check that the disc’s regional code matches the player’s regional code.This player’s regional code is 2.

Clean the disc (see page 20).

There is no picture.

Check you have switched on the TV set.

Check the connections.

The picture is of poor quality (with snow or lines).

Check the connections.

Clean the disc (see page 20).

There is no sound or the sound is of poor quality.

Check the connections.

Make sure the speakers are connected.

Make sure the MUTE function is not on.

subtitles.

Refer to the section on how to display subtitles.

The disc menu language is not the correct one.

• The disc menu language has not been set

 

EN

up (see page 17).

• The language of your choice is not

 

 

available on the disc (see page 17).

 

You have forgotten your password

 

(Parental control).

 

Select the Password option in the Preferences Page menu and press ENTER.When the “Old Password” box is displayed, press the STOP button four times in order to reset the password to 0000.

Your DivX files won’t play.

When you encounter problems make sure that the file that you are trying to play actually contains DivX video.The files often use the term “DivX” in their filename even though they have in fact been coded in another format.

Problems playing DivX version 5.1 and the version 2.5 player: with some recent DivX versions coding problems may arise that are directly linked to the ability of your computer to provide the total capacity of its microprocessor during the coding procedure. During playback, this leads to picture problems or a lack of synchronisation between sound and picture.

No surround sound.

Check the speaker configuration in the Speaker setup menu.

The remote control does not work or works only intermittently.

Check that batteries are inserted or change them.

Aim the remote control at the appliance. The infrared beam must not be blocked or interrupted.

The subtitles do not appear.

• Check that the DVD disc provides

19

Image 19
Contents Table of Contents Accessories provided Connections and SetupSome points to check before you connect your TV set Inserting batteries in the remote control Connections and SetupFront panel controls Connecting the FM aerial Connecting to audio-visual equipmentAudio in L left and Audio in R right sockets Positioning speakers Connecting the speakersMagnetic shielding Preferred surround position Front Speaker PositionTest tone / Channel balance To open and close the disc tray Number input Remote controlBasic Playback Operations Play modes Basic Playback OperationsStatus menu PBC- PlayBack Control VCDPlayback options Display options Jpeg Mp3, Jpeg and DivX filesDisplaying Jpeg files or playing mp3 files Status menu mp3Subtitles Mp3, Jpeg and DivX filesPlaying DivX files Status menuRadio Manual tuningStoring radio stations TV Display Using the player’s menusGeneral Setup Player menusPlayer menus Speaker SetupDivXR VOD Audio SetupC. Dynamic Compression Disc Menu PreferencesAudio SubtitleDefaults PasswordAdditional Information TroubleshootingGuarantee PrecautionsAdditional Information Discs and formats you can play Technical dataSound Enhancement Systems