Samsung DVD-V70, DVD-V80, DVD-V85 instruction manual Recording a Programme Immediately

Page 17

VCR Selecting the Recording Speed

Protecting a Recorded Cassette

VCR

 

 

Video cassettes have a safety tab to prevent accidental erasure.

When this tab has been removed, you cannot record on the tape.

GB

Type

Recording Time (in SP)

E-180

180 mins. or 3 hours

E-240 240 mins. or 4 hours

E-260 260 mins. or

4 hours and 20 mins.

E-300 300 mins. or 5 hours

You can record a cassette at two different speeds:

SP (Standard Play)

LP (Long Play)

In Long Play modes:

Each cassette lasts twice as long

The recording is of a slightly lower quality

To record a cassette...

Press the SPEED button on the

 

remote control, until...

In standard play mode

SP is displayed.

In long play mode

LP is displayed.

1If you wish to protect a cassette, break off the tab using a small screwdriver.

2To re-record over a protected cassette (safety tab broken), cover the hole with adhesive tape.

GB

1

Recording a Programme Immediately

VCR

 

 

Before recording a programme, you must have preset the corres- ponding station (unless you are recording via an external video source). If you have not done so, refer to pages 21 and 22.

1Switch on the television.

2To monitor the programme being recorded, select the television channel reserved for use with your DVD-VCR (or the AV input if used).

3Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape.

Result: The DVD-VCR is switched on automatically.

4Select:

The station to be recorded using the PROG ( or ) buttons or

The LINE1, LINE2 source using the INPUT SEL. button for a satellite tuner or external video source

Result: The station number is displayed and the programme can be seen on the television.

5Select the recording speed by pressing the SPEED button as many times as required (see page 32).

6Hold REC ( ) down for a while to start recording.

Result: The record indicator appears on the television and DVD-VCR display. An index is recorded on the tape (see page 42).

7To stop recording, press once.

If your DVD-VCR ejects the cassette when you start recording, check to make sure that the cassette’s safety tab is intact or that the opening (created by a broken safety tab) is covered with adhesive tape.

If you reach the end of the tape while recording, the cassette rewinds automatically.

4

4

OK

6

5

7

OK

32

33

Image 17
Contents DVD- V Contents Symbols Safety InstructionsFront View of the DVD-VCR Disc Type and CharacteristicsStereo Playback Region NumberRear View of the DVD-VCR Infrared Remote ControlAccessories Display IndicatorsConnecting DVD-VCR to the TV using the Coaxial Cable Deciding How to Connect DVD-VCRConnecting DVD-VCR to the TV using the RCA Cable Your DVD-VCR is equipped with the following connectorsRear of the DVD-VCR Plug & Auto Set upSTANDBY/ON Button Tuning Your Television for the DVD-VCR Deck Control KeysDVD Button VCR ButtonTV/VCR Button Setting the Date and TimeProg Button ButtonsSet menu Language Open MenuSelect Language If you Then Clearing a Preset Station11 To...Then Newzealand Model only Selecting the RF OUT Sound Mode B/G-D/KSetting the DVD-VCR Output Channel Press OK or ❿, until VCR Selecting the Colour Mode Nicam Newzealand Model onlyIntelligent Picture Control Remote Control Auto Power OffVCR Selecting the Cassette Type VHS Play VCR Screen Messages Repeat PlayE180 E240 300 E260 DVD-VCR allows you to playback high quality S-VHS tapesRecording a Programme Immediately Result The DVD-VCR is switched on automatically SelectRecording a Programme with Automatic Stop If you wish to Then Using the Timer Programming FeatureVCR Modifying G-CODE Programming Then press VCR Checking a Preset Recording Playing a CassetteYou can play a cassette in slow motion Playing a Sequence at Variable SpeedsOption Description Next Etc Seq Played Searching for a Specific Sequence00000 Button Function VCR Recoding from Another VCR or CamcorderBrand Codes Connection to an Television Choosing a ConnectionDigital Audio out VideoUsing the Disc Menu Language Setting Up the Language FeaturesDTS About the Rating Level About the Change PasswordDVD A/V Receiver Connections Special Playback Features Adjusting the Aspect Ratio EZ View When Playing a DVD/VCD/CD DVD Using the Display Function Changing the Camera AngleUsing the Angle button Using the Subtitle buttonDVD Repeat Play Selecting the Audio Language When playing a DVDUsing the Audio button Depending on the disc, the mark function may not work DVD Using the Mark Function MP3/WMA PlayUp to three scenes may be marked at a time CD-R MP3/WMA discs Program Play & Random PlayProgram Play CD/MP3/WMA Random Play CD/MP3/WMACD-R Jpeg Discs Picture CD PlaybackVCR Technical SpecificationsProblems and Solutions VCR Problem Action Troubleshooting Guide DVDBefore requesting service troubleshooting