3Begin OTR
OTR(2 : 30)
Press the REC/OTR button on the TV/VCR as many times as needed. The recording length will be deter- mined by the number of times you
SP
press the REC/OTR button. Each
additional push will increase the recording time by 30 minutes. It is set up to 8 hours.
Push(es) | Display | Recording length |
1 push |
| (continuous recording) |
2 pushes | 0:30 | 30 minutes |
3 pushes | 1:00 | 60 minutes |
4 pushes | 1:30 | 90 minutes |
|
|
|
17 pushes | 8:00 | 480 minutes |
TIMER RECORDING
You may set the TV/VCR to start and end a record- ing while you are away. You can set 8 programs to record on specific days, daily or weekly within a 1 year period.
In the example below, the timer is being set to record:
DATE:July 6th, 2001
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL: CH61
TAPE SPEED: SP
Make sure ...
•If your TV/VCR is connected to a cable or satellite box, you must set the TV/VCR to channel 3 or 4 to match the output channel of the box.
•Clock is set to the correct time and date before set- ting the timer.
•TV/VCR power is turned on to program it.
•To insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)
•To set the channel you want to record
Avoid overlap of programs ...
There is a chance that a program will not be record- ed. When programs overlap:
•The program with the earliest start time will record first.
•Once the earliest program finishes recording, the overlapping programs will record in the order of the program number.
•The illustration below demonstrates the sequence of recording.
Recording Sequence
Program 1
9:00AM | 10:00AM | 11:00AM | 12:00PM |
*Recording period is SHADED
1Select “TIMER PROGRAMMING”
Press the MENU button on the remote control. Confirm “TIMER PROGRAM-
MING” is pointed to by pressing the PLAY/K button.
Press the F.FWD/B button.
• If you have not yet set the clock,
“MANUAL CLOCK SET” appears. If so, follow stops [3] to [8] on page 11. Then set the timer recording.
2Select your desired program position (1~8)
Press the PLAY/K or STOP/L but- | – TIMER PROGRAMMING – | ||||
ton to select the desired program | CH DATE | BEGIN END | |||
- - | |||||
position. | |||||
- - | |||||
- - | |||||
Then, press the F.FWD/B button. | B - - | ||||
- - | |||||
| - - | ||||
| - - | ||||
| - - | ||||
|
| ||||
3 Set the channel number | – TIMER PROGRAMMING – | ||||
Press the PLAY/K or STOP/L but- | CH DATE | BEGIN END | |||
- - | |||||
ton until the desired channel num- | |||||
- - | |||||
| - - | ||||
ber appears. | B 61 | ||||
- - | |||||
| - - | ||||
(Example: CH61) | - - | ||||
- - | |||||
| |||||
Then, press the F.FWD/B button. Remember:
If your TV/VCR is connected to a cable or satellite box, you must set the TV/VCR to channel 3 or 4 to match the output channel of the box.
4Select once, every day or weekly recording
For once recording :
Press the PLAY/K (up) button until the desired date appears. (Example: “7/06” for July 6th). Then, press the F.FWD/B but- ton.
– TIMER PROGRAMMING –
CH | DATE | BEGIN | END |
- - | |||
- - | |||
- - | |||
B 61 | 7/06 FRI | ||
- - | |||
- - | |||
- - | |||
- - |
For every day recording : To record a TV program at
- 21 - | EN |