Video connection
This unit equips three types of video jacks as follows:
D VIDEO jack
This jack transmits conventional composite video signal. Connect this jack to your AV amplifier so that you can switch the both audio and video inputs at once.
yellow
Audio/video cable
(included)
yellow
VIDEO
DVD
E S VIDEO jack
This jack transmits color and luminance separately and achieves high quality color reproduction. Connect this jack to your television using a commercially available S- Video cable. If your AV amplifier is equipped with S VIDEO input and output jacks, connect to the AV amplifier so that you can switch both audio and video inputs at once.
S video cable
SVIDEO
DVD 
F AV (SCART) jack
This SCART jack can output RGB component signals and provides the best quality picture. Connect this jack to your television.
≥Change “Video— AV Output” (➡ page 18).
VCR
Amplifier |
Video pin cable |
| Television | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
S video cable
[Note]
Do not connect this unit to a television through a video cassette recorder.
If you do so, the picture may not be played back properly due to the copyright protection technology incorporated in this unit.
Connecting the power cable
Power cable
(included)
To the wall outlet
Plug the power cable into the AC IN when all connections are complete, and then plug this unit to the wall outlet.
FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION.
Caution
Do not use other AC power cables than the one provided. Otherwise it may result in causing fire or an electrical shock.
RQT6797
7