RCA TV/VCR manual Setting the Clock, Add or Erase Channels, To set the clock

Connections & Setup

TIME

TIMER

CLOCK SET

CLOCK SET
AUTO CLOCK		ON
EDS CH		AUTO
SELECT	/	: SET	OK
PREVIOUS		: QUIT	MENU
MONTH		---
DAY		---
YEAR		----
TIME		--:----
SELECT	/	: SET	OK
PREVIOUS		: QUIT	MENU

MENU
TIME
VIDEO ADJUST
AUDIO ADJUST
CLOSED CAPTION
TIMER RECORDINGS
LANGUAGE
SETTING
V-CHIP BLOCK
	SETTING
SELECT		/	: SET	OK
PREVIOUSFUNCTION			: QUIT	MENU
	AUTO CH PRESET
	CH SEARCH
	CH MEMORY
	CH MEMORY
	CABLE
	AIR	54
	SELECTADD	/	: SET		OK
	PREVIOUS		: QUIT		MENU
	SELECT		/ : SET			OK
	PREVIOUS		: QUIT			MENU

Setting the Clock

The TV/VCR has an automatic clock setting feature that automatically sets the time from an EDS (Extended Data Service) channel when the power is turned off. If there is no EDS channel, the signal is weak, or you don’t want to wait for the time to be downloaded to the TV, you can set the clock manually (instructions are on page 35).

To set the clock.

1.Display the TIME menu, use the up or down arrow to select CLOCK SET and press OK.

2.The CLOCK SET screen appears. Press the up or down arrow to select AUTO CLOCK ON and press OK.

The indicator moves to EDS CH. If you know the EDS channel in your area, use the up and down arrows to enter the number or select AUTO and press OK.

Turn off the power. The clock is set automatically using the EDS signal. It may take a few hours to set the clock.

Add or Erase Channels

You might want to add or erase some channels if they’re inactive, have weak signals, or you don’t want them in your channel list. The channel list is the list of channels that the TV/VCR tunes to when you press the channel up and/or channel down buttons.

Note: Even if you erase a channel, you can still tune to it by pressing the number buttons on the remote control.

1.Press MENU on the remote (the main MENU appears).

2.Press down arrow button to highlight SETTING.

3.Press OK (the SETTING menu appears).

4.Press the down arrow button to highlight CH MEMORY.

5.Press OK (the CH MEMORY menu appears). Follow the on-screen directions to ADD or ERASE a channel.

6.You can add or erase more channels by entering the channel number or pressing CH + or CH –.

7.To exit, press the MENU button.

Chapter 1 13