Closed Caption, Progressive, Picture Setting

Setup Menu

Closed Caption

Closed captions are data that are hidden in the video signal on specific discs, invisible without a special decoder. The difference between subtitles and captions is that subtitles are intended for hearing persons and captions are for the hearing impaired. Subtitles rarely show all of the audio. For example, captions show sound effects (e.g., “phone ringing” and “footsteps”), while subtitles don’t.

Before you select this function, please ensure that the disc contains closed captions information and your TV set also has this function.

1Press 34 to highlight “Closed Caption” in the Video Setup menu.

2Enter its submenu by pressing 2.

3Move the cursor by pressing 34 to highlight one option.

➜On: Enable Closed Caption.

➜Off: Disable Closed Caption.

4Press ENTER/OK.

5Press 1 to return to the Video Setup Page.

Progressive

This player’s COMPONENT video jack can output progressive signals to a progressive signal compatible TV for an extra high-quality picture.

1Press 34 to highlight “Progressive”.

2Enter its submenu by pressing 2.

3Move the cursor by pressing 34 to highlight one option.

➜On: Enable Progressive.

➜Off: Disable Progressive.

If you select “On”, the player prompt you to comfirm your selection.

4Press ENTER/OK.

5Press 1 to return to the Video Setup Page.

Notes on activating Progressive:

●Ensure that your TV has progressive scan.

●Connect with YPbPr video cable.

●When the Progressive is active, the VIDEO (CVBS) and S VIDEO jacks do not output video signals.

●If there is no picture, wait 15 seconds for auto recover or disactivate Progressive manually.

1Open the disc tray by pressing / (OPEN/ CLOSE)on the front panel.

2Press 1.

3Press MUTE.

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE “STANDARD DEFINITION” OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR VIDEO MONITOR COMPATIBILITY WITH THIS MODEL 525P DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

This unit is compatible with the complete line of YAMAHA products, including the projectors DPX- 1, DPX-1000, LPX-500 and the plasma monitor PDM-1.

Picture Setting

In this menu, you can personalize your picture color by adjusting brightness, contrast, tint and color (saturation).

1Press 34 to highlight “Picture Setting” in the Video Setup menu.

2Press 2 to open its submenu.

Brightness

1Press 34 to highlight “Brightness”.

2Press 2 to open the level bar.

BRIGHTNESS	- 1

3Press 1 2 to increase and decrease the brightness level.

4Press ENTER/OK to return to the Picture Setting menu.

Contrast

1Press 34 to highlight “Contrast”.

2Press 2 to open the level bar.

3Press 1 2 to increase and decrease the contrast level.

4Press ENTER/OK to return to the Picture Setting menu.

Tint

1Press 34 to highlight “Tint”.

2Press 2 to open the level bar.

3Press 1 2 to increase and decrease the tint level.

4Press ENTER/OK to return to the Picture Setting menu.