Sony KV-V2110P, KV-V2110K Connecting the Aerial, Connecting an Indoor Aerial KV V1430K/P only

Page 5

Step 2 — Connecting the Aerial

Connecting an Indoor Aerial (KV-

V1430K/P only)

If your local VHF/UHF signal is strong, an indoor aerial can be used to obtain a clear picture. Connect the supplied dipole aerial as follows.

1Insert the aerial until it clicks.

2After turning on the video TV, adjust the aerial for best reception.

2

1

GB

Connecting an Outdoor Aerial

For better TV reception and recording with clear video picture, connect an outdoor aerial to your video TV.

To connect a VHF aerial or a combination VHF/UHF aerial—75-ohm coaxial cable (round)

Attach an IEC aerial connector to 75-ohm coaxial cable.

Plug the connector into the (aerial) socket of the video TV.

VHF/UHF aerial

Rear

On a wall

or

To connect both VHF and UHF aerials

Attach the aerial cable ends to the VHF/UHF mixer (not supplied). Plug the mixer into the (aerial) socket of the video TV.

UHF aerial VHF aerial

Rear

300-ohm twin-lead cable

VHF/UHF mixer

75-ohm coaxial cable

After connecting the aerial, connect the mains lead to a wall outlet.

Getting Started

5

Image 5
Contents Trinitron Colour Video TV Safety Information PrecautionsColour System of Your Set About Moisture CondensationContents Inserting Batteries into the Remote Commander Checking the Supplied AccessoriesPreparation Getting StartedConnecting an Indoor Aerial KV V1430K/P only Connecting the AerialConnecting an Outdoor Aerial To connect both VHF and UHF aerialsBefore you begin Tuning in to TV StationsSelecting the Language on the Menu Presetting Channels Automatically For programme positions beyond Manual Programme SYS Band Label AFT UHF OFF To reactivate automatic fine- tuning AFT Setting the Clock Adjusting the Volume Switching the TV On and OffWatching the TV Selecting TV ProgrammesMuting the Sound Adjusting the PictureDisplaying the On-screen Information Selecting the picture effectHUE adjustment is available only for the Ntsc colour system Effect of each control Listening with HeadphonesWatching Line Input Inserting a Video Cassette Playing a TapeEjecting a Video Cassette Protecting Your Cassette against Accidental ErasurePlaying a Tape Displaying the on-Screen Indications Resetting the Tape CounterPlaying a Tape Repeatedly Auto Repeat Recording TV Programmes Recording TV ProgrammesRecording with the TV Off To stop recordingBefore you begin Recording TV Programmes Using the TimerSetting the Timer Press OK, then set the programme position to 26 with + ×or à Daily/weekly recording Using the Video TV before Timer Recording StartsTo stop timer recording Changing or Canceling the Timer Settings Checking the Timer SettingsIf you are not recording Recording Using the Quick-TimerIf you are recording Additional Operations Switching off Automatically Sleep TimerSwitching on at Your Desired Time On Timer To go back to automatic tracking About the Auto Head Cleaner Editing with Another VCR Connecting Optional EquipmentWatching the Picture Input from Optional Equipment Additional Information TroubleshootingFunction Problems Possible causes and remedies Timer REC on Symptoms caused by contaminated video heads Video Head CleaningTaking Care of Your Video TV Worn Video HeadsReceivable Channels SpecificationsVideo TV Set-Front Index to Parts and ControlsMenu Remote Commander