SETUP AND CONNECTIONS
HOW TO HOOK UP A VCR OR CAMCORDER
To hook up a VCR or camcorder for copying tapes, use Connection E or F.
CONNECTION A:
Attaching to a Dipole Antenna (With No Cable Box)
Follow these steps to connect a dipole antenna to your TV/VCR. Do not connect a dipole antenna if you plan to connect a different type of indoor or outdoor antenna or cable system. Optional accessories may be required for this connection.
1.Insert the antenna base into the slot on the back of your TV/VCR.
2.Connect the
3.Connect an antenna adapter to the IN FROM ANTENNA jack on the back of the TV/VCR.
4.Plug the TV/VCR power cord into the back of the TV/VCR.
5.Go to “Step 5: Connect the
Once you have plugged in your TV/VCR, adjust the length and position of the antenna rods for the best reception. For viewing VHF channels, extend the rods fully. For UHF viewing, shorten the rods.
| Antenna Base |
| Antenna Slot |
| |
| Antenna Adapter |
| IN FROM |
| ANTENNA |
INPUT | |
| |
AUDIO | VIDEO |
CONNECTION B:
Attaching to an Outside Antenna,
1.Connect as shown. Optional accessories may be required for this connection.
2.Plug the TV/VCR power cord into the back of the TV/VCR.
3.Go to “Step 5: Connect the
Match Your Type of Antenna or Cable
or | or | or |
Antenna | Antenna | |
Mixers | ||
Adapter | ||
|
Back of TV/VCR
IN FROM
ANTENNA
INPUT
AUDIO VIDEO
5