Symphonic SC724FDF owner manual Normal Recording, Skipping Unwanted Scenes During Recording

RECORDING

Make sure ...

•The unit must be turned on.

•Insert a cassette tape with its erase-prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)

NOTES:

•This unit will ONLY record and view the same channel.

•This unit cannot record the contents from the built-in DVD.

NORMAL RECORDING

TV/VCR

You can ONLY watch the same TV program that is being recorded.

1 Select the channel to be recorded

Press the Number buttons or

SKIPPING UNWANTED

SCENES DURING RECORDING

TV/VCR

Hit [PAUSE F] to temporarily stop PAUSE recording.

Press [PAUSE F] or [RECORD] to resume recording.

NOTES:

[CH. K / L].

NOTE:

CH 10

SP

• After 5 minutes, the unit will

automatically switch to the recording mode to pre-

vent tape damage.

• If Closed Caption mode is on, the On-Screen

•If the unit is connected to a cable box or satellite box, the unit must be on CH3 or CH4, then the channel to be recorded must be selected on the cable box or satellite box.

2Select the tape speed

Hit [SPEED] to select the desired tape speed (SP/ SLP).

SP

3 Begin recording REC

Hit [RECORD].

SP

4Stop recording

Hit [STOP C].

Display will appear for 5 seconds, then disappear.

- 29 - EN