Yamaha DRX-2 owner manual Sound settings, No picture appears on the TV after switching

Page 64

Problem

✘No picture appears on the TV after switching

Check the display of your DVD recorder. “PRO”:“Progressive Scan” is on

No display:“Interlaced” is on. Switch your TV to the corresponding input jack or select the corresponding connection.You can also switch the Component video output signal as follows:

1Disconnect the recorder’s power cord.

2Hold down t on the DVD Recorder while reconnecting the power cord. “PRO” (progressive scan) appears on the display.

3If you want to switch back, repeat steps 1 and 2. “PRO” disappears from the dis- play.The DVD Recorder is switched to “Interlaced.”

 

n

 

Sound

Digital output

All

Analog output

Stereo

Night mode

Off

Sound settings

Depending on which audio outputs are used, you can select the settings in this menu. If you only use the analogue audio output (AUDIO L, R), select the settings “Off” in the “Digital output” menu.

“Digital output”

For devices connected to the DIGITAL AUDIO OUT jack, you can select from the following settings.

“All”: Unalterned signals of Dolby Digital and DTS are fed to the digital out- put. MPEG-2 multi-channel signals are converted to PCM (Pulse Code Modulation).

For receivers/amplifiers with digital multi-channel sound decod- ers.

“PCM only”: Dolby Digital and MPEG-2 multi-channel signals are converted to PCM (Pulse Code Modulation).

For receivers/amplifiers without digital multi-channel sound decoders.

“Off”: Digital output switched off.

For devices with analogue audio input.

“Analog output”

For devices connected to the analogue audio output (AUDIO L, R), you can select from the following settings.

“Stereo”: For devices without DolbySurround, use this setting if the DVD

recorder is only connected to a stereo TV set.

“Surround”: Dolby Digital and MPEG-2 multi-channel are mixed down to a Dolby surround-compatible two-channel output signal. For devices with Dolby Surround Pro Logic decoder.

“Night mode”

Night mode optimises the sound for playback at low volume.You are therefore less likely to disturb your neighbours.This only works for Dolby Digital audio on DVD video discs.

59

User preferences

Page 63 Page 65
Image 64
Page 63 Page 65
Contents DRX-2 General information For Customer UseLaser safety General informationRead this before operating your unit For Canadian CustomersFeatures Six Hours Recording TimeTable of contents Access control Managing the discProgramming a recording Before you call anRemote control Quick previewAdditional TV functions Quick previewFront of the device Auxiliary jacks on the front panelOpen/Close Interrupt playback/recordingBack of the unit Symbols on your DVD recorder display Messages in the DVD recorder dis- playQuick preview Introduction Common questionsDiscs you can use IntroductionAccessories Cleaning the discsCan I use a CD lens cleaner in the DVD recorder? Regional codeConnecting your DVD recorder Preparing the remote controlConnecting your antenna Connecting your DVD recorderConnecting your TV to get the best picture Using a Component video cableUsing an S-Video cable Using a composite video cableConnecting a VCR Connecting your camcorderConnecting an AV receiver Connecting an AV receiverSurround sound connections Recording connections Power supply Switching onInitial installation Installing your DVD recorderInstalling your DVD recorder DVD recorder cannot find any TV stations Which screen formats can I select?Very few TV channels were found Automatic TV channel searchCannot select ? Adding and clearing TV channels manually Deleting TV channelsSwitching audio recording Stereo, SAP Setting the languageWhich settings can I choose? Assigning the VCR Plus+ Guide channel numbers Setting the time and date automatically Clock not set, check channel will appear on the TV screenManually setting the time & date Symbols in the menu bar On-screen informationField for temporary messages Menu barDVD-Video Video-CD No disc Error Disc type symbolsStatus field Timer information box Operating mode symbolsCurrent channel/selected input jack No signal Copy-protected signalGeneral notes on playback PlaybackInserting a disc Playing a DVD video disc Playing a DVD+RW/ +R discPlayback Can see the message EmptydiscWhen creating MP3 CDs please note the following Playing an audio CDPlaying an MP3 CD Audio CD displayAdditional playback features Playing a Super Video CDImportant notes for playback MP3 CD displayAdditional playback features Changing to another title/chapterSearching a disc No soundAdditional playback features Still pictureSlow motion Search by timeRepeat play Scan featureShuffle Zoom feature Camera angleSelect the audio language An access to Subtitle function through the on-screen menuSubtitles Manual recording GeneralManual recording Which discs can I use for recording?Recording without automatic switch-off Index displayMessage Emptydisc appears in the display Programme number of the external inputsInterrupt recording Pause Display will read Disc ERRInsert chapter markers Making recordings on DVD+R discs compatibleHow can I cancel the recording time I have just entered? How can I check the remaining recording time?Tected at step Stop recording with Stop Which recording types can I choose? Selecting the recording type QualityCan I select the recording type via a menu as well? Managing the disc contents Insert chapter markers Managing the disc contentsHiding chapters Deleting chapter markers Changing the index pictureSplitting titles Can I split titles on DVD+R discs?Playing the entire title Editing recording titles nameDeleting recordings/titles Disc settings Changing the disc nameFinishing editing Can titles be deleted from a DVD+R disc?Settings for menu does not appear Finalising DVD+R discsDelete DVD+RW discs Finalise disc does not appearProgramming a recording Timer What is FR mode?Programming recordings with the VCR Plus+ System Programming a recording TimerSelecting daily/weekly recordings Changing the recording mode Programming recordings without the VCR Plus+ SystemChange AM/PM Program numbers of the EXT1 and EXT2 cinch jackHow to change or delete a programmed recording Timer Delete programmed recordingProblem solving for programmed recordings DVD recorder is not respondingUser preferences Picture settingsUser preferences No picture appears on the TV after switching Sound settingsFor devices with analogue audio input Language settings Additional settingsDisc feature menu Auto resumeAccess control Child Lock Access control Child LockChild lock DVD and VCD Activating/deactivating child lockParental level control DVD video only Locking unlocked discsActivating/deactivating parental level control What do the ratings mean?Changing the country Changing the PIN codeHave forgotten my code Remote control does not work No playback on DVD recorder Resetting the machine to the default factory settingsBefore you call an engineer Cannot playback Super Video CDs Before you call an engineerProgrammed recording does not work Before you call an engineer Appendix Using DRX-2 remote control for your TV setAppendix Appendix Specifications Disc Formats Supported

DRX-2 specifications

The Yamaha DRX-2 is a cutting-edge network receiver designed to cater to the modern audiophile's needs while maintaining the brand's legacy for high-quality sound and reliable performance. This versatile receiver stands out with its rich feature set, a combination of advanced technologies, and user-friendly design that enhances the overall listening experience.

At the heart of the Yamaha DRX-2 is its impressive digital signal processing capabilities. The receiver utilizes sophisticated audio processing algorithms that optimize sound quality across various listening environments. Equipped with Yamaha's proprietary YPAO (Yamaha Parametric Room Acoustic Optimizer) technology, users are able to easily calibrate the receiver to their room's acoustics, ensuring an immersive sound experience tailored to individual preferences.

One of the most notable characteristics of the DRX-2 is its multi-room audio system, which allows users to enjoy their favorite music throughout their home. The receiver supports both wired and wireless connections, making it easy to distribute audio to various rooms seamlessly. Integrated with technologies such as MusicCast, the DRX-2 enables the user to stream music from a variety of popular services, including Spotify, Tidal, and more, providing an extensive library at one's fingertips.

Connectivity is another highlight of the Yamaha DRX-2. It includes a range of inputs, such as HDMI, optical, and coaxial connections, ensuring compatibility with various devices. The HDMI ARC feature simplifies the connection to televisions, allowing users to control the receiver with a single remote. The USB port also facilitates direct playback from external drives, adding convenience and versatility.

The design of the DRX-2 is sleek and modern, featuring a user-friendly interface that makes navigation effortless. The front panel includes a bright display and intuitive controls, enabling users to adjust settings and switch between sources with ease. Additionally, the receiver supports high-resolution audio formats like FLAC, ALAC, and DSD, allowing audiophiles to experience their music in its purest form.

In summary, the Yamaha DRX-2 is a powerful network receiver that combines advanced technologies, impressive connectivity options, and exceptional sound quality. Its ability to adapt to different acoustic environments, support for multi-room audio, and user-friendly design makes it a formidable choice for anyone seeking to enhance their home audio experience. Whether streaming from various services or enjoying high-resolution music, the DRX-2 delivers a sophisticated and enjoyable listening experience that Yamaha is renowned for.
Top Page Image Contents