Symphonic SC319D, SC313D owner manual Normal Recording, Skipping Unwanted Scenes During Recording

Page 20

Make sure ...

TV/VCR power must be turned on.

Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)

NOTE: This unit will ONLY record and view the same channel.

NORMAL RECORDING

OTR (One Touch Recording)

You can ONLY watch the same TV program that is being recorded.

1Select the channel to be recorded

Press the number buttons on the

CH 10

remote control or the CHANNEL

 

Kor L button.

Remember: If the TV/VCR is con- nected to a cable box or satellite box, the TV/VCR must be on CH3

or CH4, then the channel to be recorded must be selected on the cable box or satellite box.

2Select the tape speed

Press the SPEED button to select the desired tape speed (SP/ SLP).

SP

3 Begin recording

REC

 

Press the RECORD button.

SP

4Stop recording

Press the STOP button when recording is completed.

SKIPPING UNWANTED

SCENES DURING RECORDING

Press the PAUSE/STILL button to PAUSE temporarily stop recording.

Press the PAUSE/STILL or RECORD button to resume record-

ing.SP

NOTES:

After five minutes, the TV/VCR will automatically switch to the Recording mode to prevent tape dam- age.

If “CLOSED CAPTION (ON)” is selected, the On- Screen Display will appear for 5 seconds, then dis- appear.

This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR.

Make sure ...

TV/VCR power must be turned on.

Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)

NOTES:

This function CANNOT be done from the remote control.

Recording starts immediately when the REC/OTR button is pressed.

When the REC/OTR button is pressed 18 times, the TV/VCR returns to the Normal Recording mode.

To stop the OTR operation, press the STOP button on the TV/VCR or on the remote control.

To show the remaining time, press the DISPLAY button on the remote control so that “OTR” appears on the TV screen. (It will show up momen- tarily then disappear.)

Recording stops when 0:00 is reached.

Please note that in the SLP mode maximum record- ing time, assuming the tape is started at the begin- ning, is 8 hours using T-160 (or 6 hours using T-120).

If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediate- ly, ejects the tape and turns itself off.

If you press the power button during OTR, the TV/VCR continues recording until the selected length is reached.

1Select the channel to be recorded

Press the number buttons on the remote control or the CHANNEL K or L button.

Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box.

2Select the tape speed

Press the SPEED button to select the desired tape speed (SP/ SLP).

- 20 -

EN

9I03

Image 20
Contents SC313D SC319D Important Safeguards S2 8 9 8 a Precautions LocationAvoid the Hazards Electrical Shock and Fire Important Copyright InformationTable of Contents IndiceFeatures Supplied AccessoriesRemote Control Operating Controls and FunctionsTV/VCR Front Panel TV/VCRRear View Preparation for USE ANTENNA/CABLE ConnectionsSET UP for USE External Input ModeInstalling the Batteries Channel SET UP for First TimeClock SET UP Auto / Manual Manual Clock SettingTo Change Clock Setting To Select a Desired ChannelChannel SET UP Again Automatic Clock SettingDeleting or Adding ChannelTo Cancel the DAYLIGHT-SAVING Time DAYLIGHT-SAVING TimeSelecting the Language Added channel Light blueGame Mode TV OperationWatching a TV Program Picture ControlChip SET UP To Cancel the Closed Caption SystemWhen the Closed Caption Mode is on TV Rating SET UPMpaa Rating SET UP When you select TV-Y7When you select TV-PG, TV-14 or TV-MA Selection Rating Category Explanations Normal Playback Playback Auto Repeat Playback Search Still PicturePicture Search Zero ReturnRecording Picture ControlsNormal Recording Skipping Unwanted Scenes During RecordingChannel CH61 Tape Speed SP Timer RecordingPushes Display Recording length To set another program, repeat steps 2 to Timer Program ExtensionTo Correct a Program Auto Return Hints for Automatic Timer RecordingWake UP Timer Sleep Timer To Cancel the Wake UP TimerTo Cancel the Sleep Timer Copying a Video TapeSpecial Features MaintenanceOn Screen Display Real Time Tape CounterClosed Caption Problem Possible Remedy Troubleshooting GuideProblem Corrective Action Specifications General SpecificationsElectrical Specifications Other Specifications25 4 Botones de volumen Volume X / Y Botón de la alimentación PowerBotones de canales Channel K/ L Función de seguimiento- Pulse los botonesBotón K Conexiones DE ANTENA/CABLE Para Grabar UN Canal CODIFICADO/DESCODIFICADORepetición DE LA Preparación DE Canales AutopreseleccionNotas Please do not Ship Your Unit to the Teterboro Address Funai CorporationTel