CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)
If using this TV/DVD/VCR to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/DVD/VCR outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hook- ing the player up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with pow- erful and
Use audio coaxial digital cables available at retail for the audio connections.
Center
speaker
Front speaker (left)
Dolby Digital decoder
Surround
speaker (left)
Front speaker | ANT. |
|
|
| |
(right) |
|
|
|
| COAXIAL |
|
| To DIGITAL AUDIO OUT |
To COAXIAL DIGITAL | (PCM/BITSTREAM) | |
AUDIO INPUT jack | COAXIAL jack | |
Surround | Subwoofer |
|
speaker |
|
|
(right) |
|
|
|
| [Fig. 7] |
NOTES:
•Be sure to turn off the power to all components in the system before connecting another component.
•Refer to the Owner's Manuals for the components to be connected to the TV/DVD/VCR.
•If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode. (See page 45 to set DOLBY DIGITAL to ON.)
•Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD/VCR using incorrect settings may generate noise distortion, and may also dam- age the speakers.
Manufactured under license from Dolby Laboratories. “Dolby” and the
- 14 - | EN |
1C29