5 Set beginning hour | – TIMER PROGRAMMING – | ||||
Press the Arrow button K or L until | CH DATE | BEGIN END | |||
the desired hour appears. | - - | ||||
- - | |||||
| - - | ||||
(Example: “ 7, PM” for 7:30PM) | B 61 | 7/04 FRI 7:12PM | |||
- - | |||||
| |||||
| - - | ||||
Then, press the Arrow button B. | - - | ||||
- - | |||||
|
|
|
|
| |
6 Set beginning minute | – TIMER PROGRAMMING – | ||||
Press the Arrow button K or L until | CH DATE | BEGIN END | |||
- - | |||||
the desired minute appears. | - - | ||||
B 61 | 7/04 FRI 7:30PM | ||||
| - - | ||||
(Example: “30” for 7:30PM) | - - | ||||
- - | |||||
| - - | ||||
Then, press the Arrow button B. | - - | ||||
|
|
|
| ||
|
| ||||
7 Set end hour | – TIMER PROGRAMMING – | ||||
Press the Arrow button K or L until | CH DATE | BEGIN END | |||
the desired hour appears. | - - | ||||
- - | P | ||||
| - - | ||||
|
|
| - - | ||
(Example: “8, PM” for 8:50PM) | B 61 | 7/04 FRI 7:30 M | 8:30 M - - | ||
- - | |||||
| - - | ||||
Then, press the Arrow button B. | - - | ||||
- - | |||||
|
|
|
|
| |
8 Set end minute | – TIMER PROGRAMMING – | ||||
Press the Arrow button K or L | CH | DATE | BEGIN END | ||
- - | |||||
until the desired minute appears. | - - | ||||
B 61 | 7/04 FRI 7:30PM | 8:50PM - - | |||
| - - | ||||
(Example: “50” for 8:50PM) | - - | ||||
- - | |||||
| - - | ||||
Then, press the Arrow button B. | - - | ||||
|
|
|
| ||
|
| ||||
9 Set the tape speed | – TIMER PROGRAMMING – | ||||
Press the Arrow button K or L | CH | DATE | BEGIN END | ||
until the desired tape speed | - - | ||||
- - | |||||
| - - | ||||
appears. (Example: SP) | B 61 | 7/04 FRI 7:30PM | 8:50PM SP | ||
- - | |||||
| - - | ||||
| - - | ||||
| - - | ||||
10Finish setting the program
Press the ENTER or RETURN button. The program is now completed.
•To set another program, repeat steps [2] to [10].
•Press the SETUP button on the remote control to return to original mode.
11Set the timer
Press the POWER button to set automatic timer recording. The RECORDING indicator lights up.
•You must turn off the TV/DVD/VCR to activate automatic timer recording.
If power is not turned off and you continue watch- ing TV, “TIMER REC STANDBY” starts flashing on the TV screen 2 minutes before the programmed start time.
TIMER PROGRAM EXTENSION
TV/VCR
To shift the time schedule of an automatic timer recording.
1)Press the POWER button. 2)Repeat step [1] on page 32.
3)Press the RECORD button and select the desired program using the Arrow button K or L.
4)Press the RECORD button again.
Each additional push will shift forward the begin/end time for recording by 10 minutes. When the recording is already in progress, each additional push will shift forward the end time only. If you want to cancel while setting, press the PAUSE but- ton on the remote control. The recording time returns to the original time.
NOTE: When you shift forward the time schedule during recording, the recording speed will automati- cally be set to the SLP mode.
5)Press the ENTER or RETURN button to exit the setting menu. Then press the SETUP button on the remote control to return to original mode.
TO CORRECT A PROGRAM
•While setting a program; press the Arrow button s to go back one step and enter the correct num- bers using the Arrow button K or L.
•After setting a program; 1)Press the POWER button. 2)Repeat steps [1] - [2] on page 32.
3)Press the Arrow button B (or press the Arrow button s to go back one step) until the part you want to correct begins flashing, then make the changes pressing the Arrow button K or L.
4)Press the POWER button to set automatic timer recording.
TO CANCEL AN AUTOMATIC TIMER RECORDING
•After setting a program; 1)Press the POWER button.
2)Repeat steps [1] ~ [2] on page 32 and select a program you want to cancel.
3)Press the C.RESET button.
4)Press the SETUP button on the remote control to return to TV mode.
•While recording is in progress; 1)Press the POWER button.
2)Press the STOP/EJECT button on the TV/DVD/VCR.
- 33 - | EN |
1C29