Emerson EWC27T4 owner manual Automatic Clock Setting, To Change Clock Setting, Please Note

5 Select the year	– MANUAL CLOCK SET –
Press the Arrow button K or L	MONTH DAY			YEAR
until your desired year appears.	0 5	/ 0 6	THU	2 0 0 4
(Example: 2004)	HOUR	MINUTE
Then press the Arrow button B.	– –	: – –	– –
6 Select the hour	– MANUAL CLOCK SET –
Press the Arrow button K or L	MONTH DAY			YEAR
until your desired hour appears.	0 5	/ 0 6	THU	2 0 0 4
(Example: 5, PM)	HOUR	MINUTE
Then press the Arrow button B.	0 5	: – –	PM
7 Select the minute	– MANUAL CLOCK SET –
Press the Arrow button K or L	MONTH DAY			YEAR
until the desired minute appears.	0 5	/ 0 6	THU	2 0 0 4
(Example: 40)	HOUR	MINUTE
	0 5	: 4 0	PM

8 Start the clock

Press the SETUP button on the	5:40 PM
remote control.

Although seconds are not displayed, they begin counting from 00 when you press the SETUP button on the

remote control. Use this feature to synchronize the clock with the correct time.

NOTE:

When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.

AUTOMATIC CLOCK SETTING

Make sure ...

•The TV/VCR/DVD is turned on.

•Confirm the TV/VCR/DVD is receiving a RF (Radio Frequency) signal from either an antenna or cable system connection using the ANT. terminal on the rear of the TV/VCR/DVD.

NOTE:

•If a cable converter box is being used, make sure it is powered on.

•You must use the TV/VCR/DVD remote control to perform the clock setting procedure.

•If the TV/VCR/DVD is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself and the TV/VCR/DVD must be set to the output chan- nel of the cable converter box or satellite box (usu- ally channel 3 or 4), to be able to set up or correct the clock automatically.

1Select “SETTING CLOCK”

–M E N U –

Press the SETUP button on the	TIMER PROGRAMMING
remote control.	PICTURE CONTROL
	CHANNEL SET UP
	B SETTING CLOCK
Press the Arrow button K or L to	USER’S SET UP
	LANGUAGE [ENGLISH]
	V-CHIP SET UP
select “SETTING CLOCK”.	CAPTION [OFF]
	TIME SEARCH
	ZERO RETURN
Press the ENTER button to enter
“SETTING CLOCK” menu.
2 Set “AUTO CLOCK” to [ON]	– SETTING CLOCK –
Press the Arrow button B until	B AUTO CLOCK	[ON]
“AUTO CLOCK [ON]” appears.	AUTO CLOCK CH SEARCH
	MANUAL CLOCK SET	[ 02 ]
	AUTO CLOCK CH
	D.S.T.	[OFF]

TO CHANGE CLOCK SETTING

If you want to change the clock,

1)Follow steps [1] and [2].

2)Select where you want to change using the Arrow button B.

3)Enter correct numbers using the Arrow button K or L.

4)Press the SETUP button on the remote control to start the clock.

PLEASE NOTE:

If there is no local PBS station in your area or on

3Begin “AUTO CLOCK CH SEARCH”

Press the Arrow button L to select

“AUTO CLOCK CH SEARCH”.	– SETTING CLOCK –
Press the ENTER button.	AUTO CLOCK	[ON]
	B AUTO CLOCK CH SEARCH
• The TV/VCR/DVD is now	AUTO CLOCK CH	[ 02 ]
	MANUAL CLOCK SET
	D.S.T.	[OFF]
searching for the station which
contain the auto clock set signal.
The search for a signal may take up to 20
seconds per channel.
• “_ _” appears at the lower left of	– AUTO CLOCK CH SEARCH –
	08 10 13
the screen when the search has

your cable system, select “AUTO CLOCK” and press the ENTER button to turn [OFF] this function. Then you can manually adjust the clock.

ended.

•Auto Clock station- write down

the number(s) that appear on the screen. These are the auto clock

_ _

station(s) in your area. See step [4] on page 17.

•If no number(s) appear on the TV screen, there are no stations in your area which contain the Auto Clock signal. Auto Clock Setting is not possible. Please use Manual Clock Setting on page 15.

Press the SETUP button to exit the screen.

- 16 - EN

1C29