Sylvania SRC21134, SRC21194 Slow Motion, Rental Playback, Index Search, To Cancel the Rental Mode

NOTES:

•Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time.

•This function will not operate in recording mode. In the example below: To watch a program that is 2 hours, 50 minutes from the present tape position, in either direction.

1Insert a tape.

SLOW MOTION

Press the SLOW button to reduce the playback speed. The TV/VCR mutes the sound during slow motion. Press the PLAY button to return to normal playback. NOTE: If left in the Slow mode for more than five minutes, the TV/VCR will automatically go into the Stop mode.

RENTAL PLAYBACK

2Select “TIME SEARCH” mode

Press the TIME SEARCH button (with each push it will increase by 10 minute).

3Enter your desired time

TIME SEARCH

This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes.

1 Select “USER’S SET UP”

Press the PLAY/K or STOP/L but- ton until your desired time appears. (Example: “2:50” stands for 2 hours 50 minutes)

2 : 50

Press the MENU button on the

remote control.

Press the PLAY/K or STOP/L but-

ton to point to “USER’S SET UP”.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP

B USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

If you wish to cancel the Time Search at this point, press the MENU button on the remote control.

Then, press the F.FWD/B button.

ZERO RETURN

TIME SEARCH

INDEX SEARCH

4Begin Time Search

By pressing the REW/s or F.FWD/B button, the TV/VCR will rewind or fast forward to the specified point.

The time counts down as the searching progresses. When 0:00 is reached, the tape will start playback automatically.

TO CANCEL THE TIME SEARCH at this point

Press the STOP/EJECT button on the TV/VCR or the remote control. This will delete the selected time.

INDEX SEARCH

An index signal is recorded on the tape automatically when the recording is started. To view a recording at a specific start point:

2 Set “RENTAL” to [ON]	– USER’S SET UP –
Press the PLAY/K or STOP/L but-	B RENTAL	[ON]
ton to point to “RENTAL”.	REPEAT PLAY	[OFF]
	AUTO RETURN	[OFF]

Press the F.FWD/B or REW/s button until [ON] appears.

3Exit the Rental setting

Press the MENU button on the remote control to return to the TV mode.

4Start playback

Press the PLAY button to start playback. “RENTAL PLAY B” appears.

•Once you select the Rental mode, it stays in effect even after you turn off the TV/VCR.

TO CANCEL THE RENTAL MODE

1)Press the MENU button on the	– M E N U –	Repeat steps [1] and [2], select [OFF] using the
	PICTURE CONTROL
remote control. Press the	TIMER PROGRAMMING	F.FWD/B or REW/s button on the remote control.
	CHANNEL SET UP
	SETTING CLOCK
PLAY/K or STOP/L button to	USER’S SET UP	Press the MENU button on the remote control to
	LANGUAGE [ENGLISH]
	V-CHIP SET UP
point to “INDEX SEARCH”,	CAPTION [OFF]	return to TV mode.
	ZERO RETURN
then press the F.FWD/B button.	TIME SEARCH	If there is a power failure of any kind, the unit
	B INDEX SEARCH
2)Press the PLAY/K or STOP/L button within 30		will retain its memory for this feature.
seconds until the number of programs that you
want to skip appears.
3)Press the F.FWD/B or REW/s button to start
index search. If you want to go forward, press the
F.FWD/B button. If you want to go back, press
the REW/s button.
• After index search, the TV/VCR will play the tape
automatically.
• In some cases, the index mark at the beginning of
video tape cannot be detected.
		- 19 -	EN

9I03