Sylvania SRC2109E owner manual Timer Recording, Avoid over lap of programs

3Begin OTR

OTR(2 : 30)

Press the REC/OTR button on the TV/VCR as many times as needed. The recording length will be deter- mined by the number of times you

SP

press the REC/OTR button. Each

additional push will increase the recording time by 30 minutes. It is set up to 8 hours.

Push(es)	Display		Recording length
1 push		(normal recording)
2 pushes	0:30		30 minutes
3 pushes	1:00		60 minutes
17 pushes	8:00		480 minutes

TIMER RECORDING

You may set the TV/VCR to start and end a record- ing while you are away. You can set 8 programs to record on specific days, daily or weekly within a 1 year period.

In the example below, the timer is being set to record:

DATE: July 6th, 2002

SETTING TIME: from 7:30PM to 8:50PM

CHANNEL: CH61

TAPE SPEED: SP

Make sure ...

• If a cable box or satellite box is connected with the

TV/VCR you will be limited to record only one

channel. And the channel selector on the TV/VCR

must be selected to the output channel of the boxes

CH 3 or CH 4 and then the actual channel to be

Avoid over lap of programs ...

There is a chance that a program will not be record- ed. when programs overlap;

•The program with an earlier start has priority.

•Once the earliest program finishes, the overlapping programs will begin recording in sequence.

•The illustration below demonstrates the sequence of recordings.

Recording Sequence

Program 1 10:00AM-11:00AM Program 2 9:00AM-10:00AM Program 3 9:30AM-12:00PM

9:00AM 10:00AM 11:00AM 12:00PM

*Recording period is SHADED

1Select “TIMER PROGRAMMING”

Press the MENU button on the remote control.

Confirm “TIMER PROGRAM-	– M E N U –
MING” is pointed by pressing the	PICTURE CONTROL
	B TIMER PROGRAMMING
PLAY/K button.	SETTING CLOCK
	CHANNEL SET UP
And press the F.FWD/B button.	USER’S SET UP
	LANGUAGE [ENGLISH]
	ZERO RETURN
	TIME SEARCH

•If you have not yet set the clock,

“MANUAL CLOCK SET” appears. If so, follow stops [3] to [8] on page 12. Then set the timer recording.

2Select your desired program position (1~8)

Press the PLAY/K or STOP/L but-	– TIMER PROGRAMMING –
ton to select the desired program	CH DATE		BEGIN END
position.	- -	-/- - - - -	-:- -	-:- - - -
	- -	-/- - - - -	-:- -	-:- - - -
	- -	-/- - - - -	-:- -	-:- - - -
Then, press the F.FWD/B button.	B - -	-/- - - - -	-:- -	-:- - - -
	- -	-/- - - - -	-:- -	-:- - - -
	- -	-/- - - - -	-:- -	-:- - - -
	- -	-/- - - - -	-:- -	-:- - - -
	- -	-/- - - - -	-:- -	-:- - - -

recorded must be selected on the boxes.

• Clock must be set to the correct time and date

before setting the timer.

• TV/VCR power must be turn on to program it.

• Insert a cassette tape with its erase prevention tab

in place. (If necessary, rewind or fast forward the

3Set the channel number

Press the PLAY/K or STOP/L but- ton until the desired channel num- ber appears.

(Example: CH61)

Then, press the F.FWD/B button.

– TIMER PROGRAMMING –

CH	DATE	BEGIN	END
- -	-/- - - - -	-:- -	-:- - - -
- -	-/- - - - -	-:- -	-:- - - -
- -	-/- - - - -	-:- -	-:- - - -
B 61	-/- - - - -	-:- -	-:- - - -
- -	-/- - - - -	-:- -	-:- - - -
- -	-/- - - - -	-:- -	-:- - - -
- -	-/- - - - -	-:- -	-:- - - -
- -	-/- - - - -	-:- -	-:- - - -

tape to the point at which you want to begin

recording.)

• The channel you want to record is properly set in

advance.

Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box.

4Select once, every day or weekly recording

For once recording :

	– TIMER PROGRAMMING –
Press the PLAY/K (up) button	CH DATE		BEGIN END
	- -	-/- - - - -	-:	-:- -
until the desired date appears.
	- -	-/- - - - -	-:- -	-:- - - -
	- -	-/- - - - -	-:- -	-:- - - -
(Example: “7/06” for July 6th).	B 61	7/06 SAT	-:- -	-:- - - -
	- -	-/- - - - -	-:- -	-:- - - -
Then, press the F.FWD/B but-	- -	-/- - - - -	-:- -	-:- - - -
	- -	-/- - - - -	-:- -	-:- - - -
	- -	-/- - - - -	-:- -	-:- - - -

ton.

- 20 - EN

9J27