46.ANT. in Jack
Connect to an antenna, cable system, or satellite system.
47.Power cord
Connect to a standard AC outlet (120V/60Hz). NOTE: Remove the power cord from the hook to
avoid breaking a wire before you connect to a standard AC outlet.
48.COAXIAL digital audio out Jack
Connect to the digital input of an external amplifier or decoder for DVD audio only.
PREPARATION FOR USE
ANTENNA/CABLE CONNECTION
Satellite Box or
Cable Box (Not supplied)
OUT
IN
VHF/UHF Antenna (Not supplied)
From Cable System or | VHF Antenna (Not supplied) | |
Satellite Dish | ||
|
| |
From Cable | Coaxial |
System | Cable |
| (Not sup- |
| plied) |
ANT. | ||
or | ||
Cable (Not | ||
| ||
supplied) |
|
| UHF Antenna |
| (Not supplied) |
or | VHF/UHF |
| |
| Combiner |
| (Not supplied) |
| [Fig. 4] |
or | Flat |
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor antenna.
CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX
Use this connection if your cable system connects directly to your TV/VCR/DVD without a converter box.
By using this connection you can:
1)Use the TV/VCR/DVD remote to select channels.
2)Program one or more unscrambled channels for Automatic Timer Recording.
NOTE: This TV/VCR/DVD will ONLY record and view the same channel.
CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SATELLITE BOX
If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in the illustration.
By using this connection you can also record scram- bled channels. However, channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/VCR/DVD Remote Control. Unattended timer recording is limited to one channel at a time.
Antenna/Cable Connections
Continued on the Next Page.
- 11 - | EN |
1C29