Sylvania C6309CD owner manual Automatic Clock Setting, Auto Clock CH Search

AUTOMATIC CLOCK SETTING			Clock signal. Auto Clock Setting is not possible.
Make sure ...			Please use Manual Clock Setting on page 15.
• The TV/VCR is turned on.			Press the MENU button to exit the screen.
• Confirm the TV/VCR is receiving a RF (Radio			NOTE: During Auto Clock CH Search, the picture
Frequency) signal from either an antenna or cable			may be distorted. This is normal.
system connection using the ANT IN jack on the
rear of the TV/VCR.			4 Enter the channel number that contains the
NOTE:
			Automatic Clock Setting Signal
• If a cable converter box is being used, make sure it
			Press the MENU button on the remote control.
is powered on.			Press the PLAY/K or STOP/L
• You must use the TV/VCR remote control to per-
			button to select “SETTING
form the clock setting procedure.			CLOCK”.	– M E N U –
• If the TV/VCR is connected directly to a cable
			Press the F.FWD/B button to	PICTURE CONTROL
converter box or satellite box, the local PBS station				TIMER PROGRAMMING
				CHANNEL SET UP
			enter “SETTING CLOCK” menu.	B SETTING CLOCK
must be selected on the cable box itself, and the				USER’S SET UP
			Press the STOP/L button to select	LANGUAGE [ENGLISH]
				TIME SEARCH
TV/VCR must be set to the output channel of the				ZERO RETURN
			“AUTO CLOCK CH”.
cable converter box or satellite box (usually chan-
			Press the F.FWD/B or REW/s
nel 3 or 4), to be able to set up or correct the clock				– SETTING CLOCK –
			buttons until you locate Auto
automatically.				AUTO CLOCK	[ON]
			Clock Set station number. See
				B AUTO CLOCK CH	[ 45]
				AUTO CLOCK CH SEARCH
			item 3 above.	MANUAL CLOCK SET
				D.S.T.	[OFF]
1 Select “SETTING CLOCK”			Press the MENU button to exit the
Press the MENU button on the	– M E N U –		screen.
	TIMER PROGRAMMING
remote control.
	B SETTING CLOCK
	PICTURE CONTROL
Press the PLAY/K or STOP/L but-	CHANNEL SET UP
			5 Turn off the TV/VCR
	LANGUAGE [ENGLISH]
	USER’S SET UP
ton to select “SETTING CLOCK”.	ZERO RETURN
	TIME SEARCH		Once the TV/VCR is turned off , it will periodically
Press the F.FWD/B button to enter
			check and set the correct date and time.
“SETTING CLOCK” menu.
2 Set “AUTO CLOCK” to [ON]	– SETTING CLOCK –
Press the F.FWD/B button until	B AUTO CLOCK	[ON]
AUTO CLOCK [ON] appears.	AUTO CLOCK CH SEARCH
	MANUAL CLOCK SET	[ 02 ]
	AUTO CLOCK CH
	D.S.T.	[OFF]

3Begin “AUTO CLOCK CH SEARCH”

Press the STOP/L button to select	– SETTING CLOCK –
“AUTO CLOCK CH SEARCH”.	AUTO CLOCK	[ON]
Press the F.FWD/B button.	B AUTO CLOCK CH SEARCH
	MANUAL CLOCK SET	[ 02 ]
	AUTO CLOCK CH
• The TV/VCR is now searching	D.S.T.	[OFF]
for the station which contain the
auto clock set signal. The search
for a signal may take up to 20
seconds per channel.	– AUTO CLOCK CH SEARCH –
• “_ _” appears at the lower left of	08 10 13
the screen when the search has

ended.

• Auto Clock station- write down the number(s) that appear on the screen. These are the auto clock station(s) in your area. See item 4 below.

_ _

• If no number(s) appear on the TV screen, there are no stations in your area which contain the Auto

- 16 - EN

9J27