Sylvania 6720FDD owner manual Sleep Timer, To Check the BEGIN/END Time

TO CHECK THE BEGIN/END TIME			3 Auto Return will begin
1)Press the POWER button so that the RECORDING
			When all the timer recordings are completed, the
indicator goes off.
			TV/DVD/VCR will rewind to the beginning of the
2)Press the SETUP button on the remote control.
			recorded program(s).
3)Confirm “TIMER PROGRAMMING” is pointed.			NOTE:
4)Press the ENTER button. The details of programs			• If you press the POWER button while tape is
appear on the TV screen.			rewinding, the Auto Return will stop.
5)Press the SETUP button on the remote control to
return to TV mode.			4 Watch the recorded program
			Press the PLAY button.
HINTS FOR AUTOMATIC
TIMER RECORDING			TO CANCEL THE AUTO RETURN
			MODE
		TV/VCR
• Make sure the channel you want to record is prop-			Repeat steps [1] and [2], select [OFF] using the
erly set in advance.			ENTER button.
• It is not necessary to press the RECORD button for			If there is a power failure of any kind, the
timer recording.			TV/VCR/DVD will retain its memory for this fea-
• Recording begins automatically at the Start time.			ture.
• The display will not be turned on when the programmed			SLEEP TIMER
recording begins. To watch the currently recorded TV
program or to play a DVD disc, press the POWER but-
					TV/VCR
ton to turn on the display and use the SELECT button to			The Sleep Timer function turns off the
choose the TV/VCR mode or the DVD mode.
			TV/DVD/VCR without using the POWER button
• The erase-prevention tab on the cassette must be in
			after a desired period of time.
place (or you must put tape over the hole).
			NOTE:
• If the erase-prevention tab is removed, the cassette will
			• This function does not operate during Recording
be ejected when the POWER button is pressed to off.
• If the tape runs out before the end time, the			mode.
TV/DVD/VCR will switch to the Stop mode
			1 Select “SLEEP TIMER”
immediately, and the tape will be ejected.
			Press the SLEEP button on the remote control until
AUTO RETURN			“SLEEP TIMER” appears.
			2 Set sleep time
		TV/VCR
With this feature, after timer recording is finished,			Press the SLEEP button until your
the beginning of the recorded program(s) can be			desired sleep time appears.
searched for automatically.			Each additional push will increase
			the time by 30 minutes up to 120
1 Select “USER’S SET UP”				SLEEP 120 MINUTES
			minutes.
	- TV/VCR SETUP -
Press the SETUP button on the	SETTING CLOCK		After 5 seconds, exit the Sleep Timer setting.
	TIMER PROGRAMMING
remote control.	CHANNEL SET UP
	V-CHIP SET UP
	B USER’S SET UP
Press the Arrow button K or L to	LANGUAGE [ENGLISH]		TO CANCEL THE SLEEP TIMER
	ZERO RETURN
	CAPTION [OFF]
point to “USER’S SET UP”.	TIME SEARCH
	INDEX SEARCH		Press the SLEEP button on the remote control until
Then, press the ENTER button.
			“SLEEP TIMER” appears. Press the SLEEP button

until “SLEEP 0 MINUTES” appears.

2Set “AUTO RETURN” to [ON]

– USER’S SET UP –

Press the Arrow button K or L to
point to “AUTO RETURN”.	REPEAT PLAY	[OFF]
	RENTAL	[OFF]
Press the ENTER button until [ON]	B AUTO RETURN	[ON]
	TV AUDIO	[STEREO]
	VCR AUDIO	[HIFI]
appears.
		- 34 -	EN
			1C29