Sylvania WSSC132 owner manual Hints for Automatic Timer Recording, Wake UP Timer, Auto Return

TO CANCEL AN AUTOMATIC TIMER RECORDING

•After setting a program; 1)Press the POWER button.

2)Repeat steps [1] ~ [2] under TIMER RECORD- ING, page 21, and select a program you want to cancel.

3)Press the T-PROG. CLEAR button.

4)Press the MENU button on the remote control to return to TV mode.

•While recording is in progress; 1)Press POWER button.

2)Press the STOP/EJECT button on the TV/VCR.

TO CHECK THE BEGIN/END TIME

1)Press the POWER button so that the REC indicator goes off.

2)Press the MENU button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed

to.

4)Press the F.FWD/B button. The details of pro- grams appear on the TV screen.

5)Press the MENU button on the remote control to return to TV mode.

HINTS FOR AUTOMATIC

TIMER RECORDING

•Make sure the channel you want to record is prop- erly set in advance.

•It is not necessary to press the RECORD button for timer recording.

•Recording begins automatically at the Start time.

•If you are recording using a Timer mode, you may not operate the unit manually.

•The erase-prevention tab on the cassette must be in place (or you must put tape over the hole).

•If the erase-prevention tab is removed, the cassette will be ejected when the POWER button is pressed to off.

•If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediate- ly, and the tape will be ejected.

2 Set “AUTO RETURN” to [ON]	– USER’S SET UP –
Press the PLAY/K or STOP/L but-	RENTAL	[OFF]
ton to point to “AUTO RETURN”.
	REPEAT PLAY	[OFF]
	B AUTO RETURN	[ON]

Press the F.FWD/B or REW/s button until [ON] appears. Then,

press the MENU button on the remote control to return to TV mode.

3Auto Return will begin

When all the timer recordings are completed, the TV/VCR will rewind to the beginning of the recorded program(s).

NOTE:

•If you press the POWER button while tape is rewinding, the Auto Return will stop.

4Watch the recorded program

Press the PLAY button.

TO CANCEL THE AUTO RETURN MODE

Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button. Then, press the MENU button on the remote control to return to TV mode.

If there is a power failure of any kind, the unit will retain its memory for this feature.

WAKE UP TIMER

The Wake Up Timer function turns on the TV/VCR without using the POWER button after a desired period of time.

NOTES:

•Use the remote control for this procedure.

•Clock must be set to the correct time before setting the timer.

•If you want to select [TAPE], you must insert a cassette tape in the TV/VCR. The tape will start playback automatically on your desired time.

		1 Select “WAKE UP TIMER”
AUTO RETURN
		Press the WAKE-UP/SLEEP button
With this feature, after timer recording is finished,		on the remote control once, and
		confirm “ON/OFF” is pointed.
the beginning of the recorded program(s) can be
		Press the F.FWD/B or REW/s
searched for automatically.
		button until [ON] appears.
1 Select “USER’S SET UP”	– M E N U –
	TIMER PROGRAMMING
Press the MENU button on the	PICTURE CONTROL
	CHANNEL SET UP
	SETTING CLOCK
remote control.	B USER’S SET UP
	V-CHIP SET UP
Press the PLAY/K or STOP/L but-	LANGUAGE [ENGLISH]
	CAPTION [OFF]
	ZERO RETURN

ton to point to “USER’S SET UP”.	TIME SEARCH
	INDEX SEARCH
Then, press the F.FWD/B button.
	- 23 -

WAKE UP B ON/OFF		[ON]
TIMER	TV/TAPE	[TV]
	TIME	[12:00AM]

EN

9I03