Sylvania D6313CB Channel SET UP Again, Deleting or Adding Channel, To Change Clock Setting

1 Select “SETTING CLOCK”		– M E N U –
Press the MENU button on the	TIMER PROGRAMMING
	PICTURE CONTROL
remote control. Press the PLAY/K	B SETTING CLOCK
	CHANNEL SET UP
	USER’S SET UP
or STOP/L button to point to “SET-	V-CHIP SET UP
	LANGUAGE [ENGLISH]
TING CLOCK”.	CAPTION [OFF]
	ZERO RETURN
	TIME SEARCH
Then, press the F.FWD/B button.
2 Select “MANUAL CLOCK	– SETTING CLOCK –
SET”	AUTO CLOCK		[ON]
Press the PLAY/K or STOP/L but-
	AUTO CLOCK CH [AUTO]
ton to point to “MANUAL CLOCK	B MANUAL CLOCK SET
SET”.	D.S.T.		[OFF]
Then, press the F.FWD/B button.
3 Select the month	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY		YEAR
ton until your desired month	0 5 / – – – – – – – – –
appears. (Example: May → 05)	HOUR	MINUTE
Then, press the F.FWD/B button.	– –	: – –	– –
4 Select the day	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY		YEAR
ton until your desired day appears.	0 5 / 0 1 – – – – – – –
(Example: 1st → 01)	HOUR	MINUTE
Then, press the F.FWD/B button.	– –	: – –	– –

NOTE:

When unplugging the AC cord or if there is a power failure for more than 30 seconds, you may have to reset the clock.

TO CHANGE CLOCK SETTING

If you want to change the clock, 1)Follow steps [1] and [2].

2)Select where you want to change using the F.FWD/B or REW/s button.

3)Enter correct numbers using the PLAY/K or STOP/L button.

4)Press the MENU button on the remote control to start the clock.

PLEASE NOTE:

If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press the F.FWD/B or REW/s button to turn [OFF] this function. Then you can manually adjust the clock.

CHANNEL SET UP AGAIN

Make sure ...

•Press the POWER button to turn on the TV/VCR.

5 Select the year	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY		YEAR
ton until your desired year appears.	0 5	/ 0 1	TUE 2 0 0 1
(Example: 2001)	HOUR	MINUTE
Then, press the F.FWD/B button.	– –	: – –	– –
6 Select the hour	– MANUAL CLOCK SET –

1Select “CHANNEL SET UP”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to point to “CHANNEL SET UP”.

Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK

BCHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH

Press the PLAY/K or STOP/L but-	MONTH DAY		YEAR
ton until your desired hour appears.	0 5	/ 0 1	TUE 2 0 0 1
(Example: 5, PM)	HOUR	MINUTE
Then, press the F.FWD/B button.	0 5	: – –	PM
7 Select the minute	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY		YEAR

2Begin auto preset

Press the PLAY/K or STOP/L but- ton to point to “AUTO PRESET”. Then, press the F.FWD/B button. The tuner scans and memorizes all the active channels in your area.

– CHANNEL SET UP –

ADD / DELETE CH (TV)

BAUTO PRESET

ton until the desired minute appears.	0 5	/ 0 1	TUE 2 0 0 1
(Example: 40)	HOUR	MINUTE
	0 5	: 4 0	PM
8 Start the clock			5:40 PM

Press the MENU button on the remote control.

Although seconds are not displayed, they begin counting from 00 when

you press the MENU button on the remote control. Use this feature to synchronize the clock with the correct time.

3After scanning

The tuner stops on the lowest memorized channel.

DELETING (OR ADDING)

CHANNEL

The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)

- 13 - EN

0B19