Clock SET UP Auto / Manual, Auto Clock Setting

CLOCK SET UP

(AUTO / MANUAL)

Set the clock accurately for proper automatic timer recording. If the Public Broadcasting Station (PBS) is available in your area, follow “AUTO CLOCK SET- TING”. If it is not, follow “MANUAL CLOCK SET- TING”.

2 Set “AUTO CLOCK” to [ON]	– SETTING CLOCK –
Press the F.FWD/B or REW/s	B AUTO CLOCK	[ON]
button repeatedly until [ON]	AUTO CLOCK CH	[AUTO]
appears.	MANUAL CLOCK SET
	D.S.T.	[OFF]

3Enter the channel number for the PBS station

AUTO CLOCK SETTING

You can have the TV/VCR set the clock automatical- ly by using the Public Broadcasting Station (PBS) channel in your area. Once you have set the clock by using the following procedure, the TV/VCR will automatically monitor the correct time and date being

Press the PLAY/K or STOP/L but- ton to point to “AUTO CLOCK CH”.

Then press the F.FWD/B or REW/s button until the channel number for your local PBS station appears.

– SETTING CLOCK –

AUTO CLOCK	[ON]
AUTO CLOCK CH	[AUTO]
MANUAL CLOCK SET
B D.S.T.	[OFF]

broadcast by the PBS station in your area, using a new service called Extended Data Service (XDS).

Make sure ...

•TV/VCR power must be turned on.

•Confirm that the antenna connections are correct.

•The cable converter box must be turned on if your TV/VCR is connected directly to it. (See NOTES:)

•The channel is properly set in advance. (See page 13.)

NOTES:

•Auto clock setting only needs to be set once. But it can be done again if the clock’s time has become incorrect for some reason.

•If the TV/VCR is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/VCR must be set to the output channel of the cable converter box or satellite box (usually chan- nel 3 or 4), to be able to set up or correct the clock automatically.

If you do not know what your local PBS station is, then follow “Manual Clock Settings” on page 15. The TV/VCR cannot control the channels of the cable converter box or satellite box.

If you do not know the PBS channel number, leave it set to [AUTO] which is located before [2]. The TV/VCR will search automatically all available chan- nels for the local PBS station, and will select that channel.

4Exit the Auto Clock Setting

Press the MENU button on the remote control to return to TV mode.

5Turn off the TV/VCR

Turn the TV/VCR off. Because the Auto Clock func- tions automatically while the TV/VCR is off.

If you choose [AUTO],

• the TV/VCR must search until the PBS channel is

found. It must scan each channel for a couple of

seconds to determine if that channel is transmitting

the XDS signal.

• if the time, that is automatically set by this selected

PBS station is incorrect, it may not be your local

PBS station, but one from a different time zone. Or

there is a case that no channel is broadcasting the

XDS signal in your area, as shown by no time. In

these cases, you must manually enter the correct

local PBS station, or set the clock manually and

turn off the Auto Clock Setting feature.

1Select “SETTING CLOCK”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to point to “SETTING CLOCK”.

Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH

- 14 -

9I03