For every day recording : To record a TV program at the same time on the same channel every day. (Example: Monday through Sunday)
Press the STOP/L (down) button | – TIMER PROGRAMMING – | ||||
until “EVRY DAY” appears. | CH DATE | BEGIN END | |||
- - | - - - | ||||
Then, press the F.FWD/B but- | |||||
- - | - - - | ||||
- - | - - - | ||||
ton. | |||||
B 61 | EVRY DAY | ||||
- - | - - - | ||||
| - - | - - - | |||
| - - | - - - | |||
| - - | - - - |
For weekly recording : To record a TV program at the same time on the same channel every week. (Example: every Monday)
Press the STOP/L (down) button | – TIMER PROGRAMMING – | |||||
CH DATE | BEGIN END | |||||
until “EVRY” and your desired | - - | - - - | ||||
day of the week appear together. | - - | - - - | ||||
- - | - - - | |||||
B 61 EVRY MON | ||||||
Then, press the F.FWD/B but- | - - | - - - | ||||
- - | - - - | |||||
ton. | - - | - - - | ||||
- - | - - - | |||||
|
|
|
|
| ||
|
| |||||
5 Set beginning hour | – TIMER PROGRAMMING – | |||||
CH DATE | BEGIN END | |||||
Press the PLAY/K or STOP/L but- | ||||||
- - | - - - | |||||
ton until the desired hour appears. | - - | - - - | ||||
- - | - - - | |||||
B 61 | 7/05 | FRI | 7:12PM | |||
(Example: “ 7, PM” for 7:30PM) | - - | - - - | ||||
- - | - - - | |||||
Then, press the F.FWD/B button. | - - | - - - | ||||
- - | - - - | |||||
|
|
|
|
| ||
|
| |||||
6 Set beginning minute | – TIMER PROGRAMMING – | |||||
Press the PLAY/K or STOP/L but- | CH DATE | BEGIN END | ||||
- - |
| |||||
ton until the desired minute | - - - | |||||
- - | - - - | |||||
- - | - - - | |||||
appears. (Example: “30” for | B 61 | 7/05 | FRI | 7:30PM | ||
- - | - - - | |||||
- - | - - - | |||||
7:30PM) | - - | - - - | ||||
- - | - - - | |||||
Then, press the F.FWD/B button. |
|
|
|
|
| |
|
| |||||
7 Set end hour | – TIMER PROGRAMMING – | |||||
Press the PLAY/K or STOP/L but- | CH DATE | BEGIN END | ||||
- - |
| |||||
ton until the desired hour appears. | - - - | |||||
- - | - - - | |||||
- - | - - - | |||||
(Example: “8, PM” for 8:50PM) | B 61 | 7/05 | FRI | 7:30PM 8:30PM - - | ||
- - | - - - | |||||
- - | - - - | |||||
Then, press the F.FWD/B button. | - - | - - - | ||||
- - | - - - | |||||
|
|
|
|
| ||
|
|
|
|
|
| |
8 Set end minute | – TIMER PROGRAMMING – | |||||
Press the PLAY/K or STOP/L but- | ||||||
CH DATE | BEGIN END | |||||
ton until the desired minute | - - | - - - | ||||
| - - | - - - | ||||
appears. (Example: “50” for | - - | |||||
- - | ||||||
| B 61 | 7/05 | 7:30PM 8:50PM- - | |||
8:50PM) | - - | - - - | ||||
- - | - - - | |||||
Then, press the F.FWD/B button. | - - | - - - | ||||
|
|
|
|
| ||
|
| |||||
9 Set the tape speed | – TIMER PROGRAMMING – | |||||
Press the PLAY/K or STOP/L but- | CH | DATE | BEGIN END | |||
- - |
| |||||
ton until the desired tape speed | - - - | |||||
- - | - - - | |||||
| - - | - - - | ||||
appears. (Example: SP) | B 61 | 7/05 | FRI | 7:30PM | 8:50PM SP | |
- - | - - - | |||||
| - - | - - - | ||||
| - - | - - - | ||||
| - - | - - - |
10Finish setting the program
Press the F.FWD/B or REW/s button. The program is now completed.
•To set another program, repeat steps [2] to [10].
•Press the MENU button on the remote control to return to original mode.
11Set the timer
Press the POWER button to set automatic timer recording. The TIMER REC indicator lights up.
•You must turn off the TV/VCR to activate automat- ic timer recording.
If power is not turned off and you continue watch- ing TV, “TIMER REC STANDBY” starts flashing on the TV screen 2 minutes before the programmed start time.
To shift the time schedule of an automatic timer recording.
1)Press the POWER button. 2)Repeat step [1] on page 20.
3)Press the RECORD button and select the desired program using the PLAY/K or STOP/L button.
4)Press the RECORD button again.
Each additional push will shift forward the begin/end time for recording by 10 minutes. When the recording is already in progress, each additional push will shift forward the end time only. If you want to cancel while setting, press the PAUSE/STILL button on the remote control. The recording time returns to the original time.
NOTE: When you shift forward the time schedule during recording, the recording speed will automati- cally be set to the SLP mode.
5)Press the F.FWD/B or REW/s button to exit the setting menu. Then press the MENU button on the remote control to return to original mode.
TO CORRECT A PROGRAM
•While setting a program; press the REW/s but- ton to go back one step and enter the correct num- bers using the PLAY/K or STOP/L button.
•After setting a program; 1)Press the POWER button. 2)Repeat steps [1] - [2] on page 20.
3)Press the F.FWD/B button (or press the REW/s button to go back one step) until the part you want to correct begins flashing, then make the changes pressing the PLAY/K or STOP/L but- ton.
4)Press the POWER button to set automatic timer recording.
- 21 - | EN |