JVC TV-13142W, TV 13142 manual Loading and Unloading a Video Cassette

Page 34

LOADING AND UNLOADING A VIDEO CASSETTE

Use only video cassette tapes marked and .

LOADING

Push the center of the tape until it is automatically retracted into the TV/VCR.

AUTOMATIC POWER ON AND PLAY

When loading a cassette tape without the erase prevention tab intact, the TV/VCR will turn on automatically and playback will start immediately.

Insert the cassette with its labeled side facing you.

An inverted video cassette cannot be inserted.

UNLOADING

1	To unload a video cassette, press the STOP/
	EJECT button on the TV/VCR twice. The first
	press will stop the tape in any mode.The second

press will eject the tape.

STOP/EJECT

AUTOMATIC EJECT

If the TV/VCR automatically rewinds the tape to the beginning (AUTO REWIND FEATURE), the tape will be ejected automatically. (See NOTE on page 38.)

2 Pull the cassette out.

NOTE: • Always eject the tape when not in use.

•The cassette tape can be ejected even if the POWER is “OFF”.

TO PREVENT ACCIDENTAL ERASURE

After recording, break off the erase prevention tab if you do not wish to record over the tape.

Screwdriver

TO RECORD AGAIN

Cover the hole with vinyl tape.

Be careful the tape does not extend past the edges of the video cassette housing.

Erase prevention tab

Adhesive tape

TAPE SPEED AND MAXIMUM RECORDING TIME

TAPE SPEED

VIDEO CASETTE TAPE

T-160

T-120

T-90

T-60

T-30

SP (Standard Play)

2-2/3 hours

2 hours

1-1/2 hours

1 hour

30 minutes

EP (Extended Play)

8 hours

6 hours

4-1/2 hours

3 hours

1-1/2 hours

32

Image 34

Contents TV/VCR Combo USER’S Guide Serial NumberRisk of Electric Shock Do not Open Power Sources CleaningAccessories Read InstructionsDamage Requiring Service POWER-CORD ProtectionPower Lines Replacement PartsHeat Safety CheckWall or Ceiling Mounting NEC SectionFeatures Table of Contents If you cause a static discharge when touching PrecautionsWhen YOU Experience the Above Conditions Moisture CondensationPower Source To USE AC Power SourceCassette Loading Slot To insert or remove a video tape AC Power Cord Connect to a 120V, 60Hz outletLocation of Controls RecordingCounter Reset Button Used to reset the counter to Remote Control17. SP/EP Selector Button Sets the tape speed for recording Arrow Install two AA penlightDiagram in the battery compartment Size batteries, payingNot included UHF 300 ohm VHF 300 ohm Antenna Connections300-75 OHM Matching Transformer not included Combiner not included VHF 75 ohmFor Subscribers to Scrambled Cable TV Service For Subscribers to Basic Cable TV ServiceCable TV Connections Setting Language Time Zone Setting Standard Time Auto Clock SettingAuto Clock Setting Canadian ViewersEnter button Then press the Enter buttonLight Saving Time option, then press Menu button until the Menu screen is clearedManual Clock Setting Set the TV/CATV menu TV OperationTo turn on the TV/VCR Position. See VHF/UHF ChannelsMuting Channel + CallTV/CAPTION/TEXT SleepChannel Return Closed Captioning with a VCR What is Closed CAPTIONING?To View Closed Captions To Memorize Channels Automatic Memory Tuning Mode, then press To ADD/DELETE ChannelsTo select the ADD/DELETE + or buttonTo Register Password Setting the V-CHIPSET then press the Enter button To SET the V-CHIP For further details of settingSee next Movie Rating US TV RatingCanadian English Rating To Change Password Brightness Picture Control AdjustmentsMenu button Press the SET + or button to select the TV Color Tint Reset Pictures CancelSharpness Enter button To SET the on TimerOption, then press Set the desired minuteTo cancel the OFF Timer function To SET the OFF TimerTo confirm the ON/OFF Timer Loading and Unloading a Video Cassette To Stop Playback PlaybackTo Start Playback To play a prerecorded tapeFORWARD/REVERSE Picture Search To Rewind or Forward the Tape RapidlyDigital Tracking Controls ScreenSpeed Search Times Special PlaybackTo Visually Search for Desired Points To Watch Still PictureAuto Repeat option Repeat mode is canceledTo Watch a Tape Repeatedly PositionRecording a TV Program Recording and Viewing the Same TV ProgramPress the Pause button to avoid recording unwanted material To Stop Recording TemporarilyTo Stop Recording Press the Stop button to stop recordingInstant Timer Recording ITR Timer Recording See page 42 for the Daily/Weekly TimerSpeed as in step Press the Timer button. The REC TimerPress the Enter button to accept them To Confirm the Settings Other Functions for the Timer RecoringTo SET DAILY/WEEKLY Timer ExampleTo Cancel a Program If the Program Overlaps AnotherCounter to Using the Real Time Tape CounterTo View the Counter Display Counter will display the elapsed timeUsing Zero Return Connection to Another VCR Duplicating a Video TapeConnection to Camcorder Reception Disturbances IgnitionSymptoms Cause Possible Solutions Power Troubleshooting GuideTV Broadcast Reception Recording Symptoms Cause Possible SolutionsRemote Control PlaybackVideo Head Cleaning Video Head CloggingSpecifications TelevisionJVC Company of America JVC CANADA, INC 5800501A K 01/03