FUNAI SC1903 Clock SET UP Auto / Manual, To Select a Desired Channel, Manual Clock Setting

TO SELECT A DESIRED CHANNEL

You can select the desired channel by using the CHANNEL K or L button on or directly pressing the number buttons on the remote control.

Note for using the number buttons:

•When selecting cable channels which are higher than 99, press the +100 button first, then, press the last two digits. (Example: to select channel 125, first press the +100 button then press “2” and “5”).

•You must proceed single-digit channel numbers with a zero (Example: 02 ... 09).

CLOCK SET UP

(AUTO / MANUAL)

The TV/VCR clock must be set correctly before VCR timer recording is possible. It is suggested that the clock be set manually when first setting up the TV/VCR. Then, set to [ON] the auto clock setting which will periodically correct the setting if neces- sary.

NOTE: If you cannot receive a station with time sig- nals, auto clock setting cannot be performed. Use manual setting only.

4 Select the day	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY				YEAR
ton until your desired day appears.	0 5	/	0 6	– – – – – – –
(Example: 6th → 06)	HOUR		MINUTE
Then, press the F.FWD/B button.	– –	: – –		– –
5 Select the year	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY				YEAR
ton until your desired year appears.	0 5	/ 0 6		TUE	2 0 0 3
(Example: 2003)	HOUR		MINUTE
Then, press the F.FWD/B button.	– –	: – –		– –
6 Select the hour	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY				YEAR
ton until your desired hour appears.	0 5	/ 0 6		TUE	2 0 0 3
(Example: 5, PM)	HOUR		MINUTE
Then, press the F.FWD/B button.	0 5	: – –		PM
7 Select the minute	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY				YEAR
ton until the desired minute	0 5	/ 0 6		TUE	2 0 0 3
appears. (Example: 40)	HOUR		MINUTE
	0 5	: 4 0		PM

MANUAL CLOCK SETTING

Make sure ...

•The TV/VCR is turned on.

In the example below, the clock is to be set to:

DATE	May 6th, 2003
SETTING TIME	5:40PM

8 Start the clock 5:40 PM

Press the MENU button on the remote control.

Although seconds are not dis- played, they begin counting from

1Select “SETTING CLOCK”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L button to point to “SETTING CLOCK”.

Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH

00 when you press the MENU button on the remote control. Use this feature to synchronize the clock with the correct time.

NOTE:

When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.

TO CHANGE CLOCK SETTING

2Select “MANUAL CLOCK SET”

Press the PLAY/K or STOP/L	– SETTING CLOCK –
button to point to “MANUAL	AUTO CLOCK		[ON]
CLOCK SET”.	AUTO CLOCK CH SEARCH
	B MANUAL CLOCK SET
	AUTO CLOCK CH		[ 02 ]
Then, press the F.FWD/B button.	D.S.T.		[OFF]
3 Select the month
Press the PLAY/K or STOP/L	– MANUAL CLOCK SET –
button until your desired month	MONTH DAY		YEAR
appears. (Example: May → 05)	0 5 / – – – – – – – – –
Then, press the F.FWD/B button.	HOUR	MINUTE
	– –	: – – – –

If you want to change the clock, 1)Follow steps [1] and [2].

2)Select where you want to change using the F.FWD/B or REW/s button.

3)Enter correct numbers using the PLAY/K or STOP/L button.

4)Press the MENU button on the remote control to start the clock.

PLEASE NOTE:

If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press the F.FWD/B or REW/s button to turn [OFF] this function. Then you can manually adjust the clock.

- 11 - EN

9I03