FUNAI F319CC Clock SET UP Auto / Manual, To Select a Desired Channel, Manual Clock Setting

TO SELECT A DESIRED CHANNEL

You can select the desires channel by using the CHANNEL K or L button on or directly pressing the number buttons on the remote control.

Note for using the number buttons:

•When selecting cable channels which are higher than 99, press the +100 button first, then, press the last two digits. (Example: to select channel 125, first press the +100 button then press “2” and “5”).

•You must proceed single-digit channel numbers with a zero (Example: 02 ... 09).

CLOCK SET UP

(AUTO / MANUAL)

The TV/VCR clock must be set correctly before VCR timer recording is possible. It is suggested that the clock be set manually when first setting up the TV/VCR. Then, setup auto clock correction which will periodically correct the setting if necessary. NOTE: If you cannot receive a station with time sig- nals, auto clock setting cannot be performed. Use manual setting only.

MANUAL CLOCK SETTING

Make sure ...

•The TV/VCR is turned on.

In the example below, the clock is to be set to:

DATE	May 7th, 2002
SETTING TIME	5:40PM

4 Select the day	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY			YEAR
ton until your desired day appears.	0 5	/ 0 7	– – – – – – –
(Example: 7th → 07)	HOUR	MINUTE
Then, press the F.FWD/B button.	– –	: – –	– –
5 Select the year	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY			YEAR
ton until your desired year appears.	0 5	/ 0 7	TUE	2 0 0 2
(Example: 2002)	HOUR	MINUTE
Then, press the F.FWD/B button.	– –	: – –	– –
6 Select the hour	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY			YEAR
ton until your desired hour appears.	0 5	/ 0 7	TUE	2 0 0 2
(Example: 5, PM)	HOUR	MINUTE
Then, press the F.FWD/B button.	0 5	: – –	PM
7 Select the minute	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY			YEAR
ton until the desired minute	0 5	/ 0 7	TUE	2 0 0 2
appears. (Example: 40)	HOUR	MINUTE
	0 5	: 4 0	PM
8 Start the clock				5:40 PM

Press the MENU button on the remote control.

Although seconds are not displayed, they begin counting from 00 when

you press the MENU button on the remote control. Use this feature to synchronize the clock with the

1Select “SETTING CLOCK”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to point to “SETTING CLOCK”.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH

correct time.

NOTE:

When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.

Then, press the F.FWD/B button.

2Select “MANUAL CLOCK SET”

Press the PLAY/K or STOP/L but-	– SETTING CLOCK –
ton to point to “MANUAL	AUTO CLOCK		[ON]
CLOCK SET”.	AUTO CLOCK CH SEARCH
	B MANUAL CLOCK SET
	AUTO CLOCK CH		[ ]
Then, press the F.FWD/B button.	D.S.T.		[OFF]
3 Select the month
Press the PLAY/K or STOP/L but-	– MANUAL CLOCK SET –
ton until your desired month	MONTH DAY		YEAR
appears. (Example: May → 05)	0 5 / – – – – – – – – –
Then, press the F.FWD/B button.	HOUR	MINUTE
	– –	: – – – –

TO CHANGE CLOCK SETTING

If you want to change the clock, 1)Follow steps [1] and [2].

2)Select where you want to change using the F.FWD/B or REW/s button.

3)Enter correct numbers using the PLAY/K or STOP/L button.

4)Press the MENU button on the remote control to start the clock.

PLEASE NOTE:

If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press the F.FWD/B or REW/s button to turn [OFF] this function. Then you can manually adjust the clock.

- 11 - EN

9I03