MC13D1MG 3/22/02 1:26 PM Page 25
A
●This function cannot be done from the remote control.
●Recording starts immediately when you press REC/OTR.
Before you begin, make sure ...
●The TV/VCR power is on.
●Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)
One-Touch Recording 25
| POWER | SLEEP/WAKE UP |
1 | 1 PLAY | F.FWD |
| MENU | ALT.CH |
1 Press the Number buttons or CH(annel) o/p to select the channel you want to record. Remember, if the TV/VCR is connected to a Cable
1 2 3
4 5 6
7 8 9
CH.
Box or Satellite Box, the TV/VCR must be on channel 3 or 4. Select the channel you want to record at the Cable Box/Satellite Box.
2 Press SPEED to select a tape speed (SP/ SLP). Details are on page 24.
3 Press REC/OTR repeatedly to select a record- ing length. The recording length will be determined by the number of times you press REC/OTR. Each press of REC/OTR will increase the recording time by 30 minutes. It may be set up to a maximum recording length of eight hours.
OTR (2:30)
SP
REC/OTR | Display | Recording length |
presses |
|
|
1 press |
| (normal recording) |
2 presses | 0:30 | 30 minutes |
3 presses | 1:00 | 60 minutes |
|
|
|
17 presses | 8:00 | 480 minutes |
|
|
|
0 +100 VOL.
SPEED RESET PAUSE/STILL
RECORD | TIME SEARCH MUTE |
2
3Press REC/OTR on the TV/VCR.
Helpful Hints
•If you press REC/OTR 18 times, normal recording resumes.
•To stop an OTR, press STOP/p.
•To show the remaining time, press DISPLAY. OTR will appear briefly on the TV screen.
•Recording stops when 0:00 is reached.
•The maximum recording time of a
•If the tape ends before the recording’s end time, the TV/VCR will stop recording, eject the