Channel Plus SVC-10 warranty Sample System Diagram, Features

Page 3

Sample System Diagram 3:

Transmitting S-video and DTS from a DVD 600 feet with IR

FEATURES

EASY WIRING

Connect a local monitor here

400 600

The SVC-10 transmitter and receiver communicate over a single run of CAT-5 wire. A back panel control is on the transmitter to

200 800 Set LENGTH ADJUST to 600

Connect a local receiver here

0 1000

allow compensation for any length of wire up to 1000 feet. Wire RJ-45 connections according to TIA T568A standard.

FLEXIBLE VIDEO INPUT

POWER 15VDC 300mA

350-103 power supply (included)

Attach the IR emitter directly over the IR sensor.

AUDIOOUT

 

DIGITALOUT

PCM/AC3/DTS

 

 

VIDEOOUT

 

AUDIO IN

 

DIGITAL IN

VIDEO IN

 

LEFT

RIGHT

COAX

VIDEO

S

Digital

audio

s-video

DVD

LENGTH

 

ADJUST

CAT-5

(in feet)

400

600

IR REPEATERS

200

800

 

0

1000

 

2171

Choose between s-video input or composite video. The SVC-10 has its own connector for each - no need for a converter plug.

UNIVERSAL AUDIO

The SVC-10 accepts either left&right analog audio or digital audio. It can handle either coax or fiber optic (TOSLINK) digital audio. When using the fiber optic cable, the SVC-10 converts this signal and puts it on the coax digital loop out connector. When using analog audio, the SVC-10 will maintain Dolby Pro- logic® encoding if present.

LOOP OUT CONNECTORS

All SVC-10 connectors have built in loop through connectors for a second device such as a local monitor.

ACTIVE TERMINATE FEATURE

600 feet CAT-5

350-103 power

 

 

 

 

 

supply (included)

 

 

 

 

 

AUDIO

AUDIO

VIDEO

S-

CAT-5

IR

LEFT

RIGHT

 

 

 

 

2132

TV

Digital

Surround Sound

Processor

6

The SVC-10 terminates the inputs into a 75 ohm load. When a second cable is connected to the output, the SVC-10 automatically disconnects this termination to allow the second device to provide the termination.

IR CONTROL

Standard 12 volt ChannelPlus IR targets and emitters can be used with the SVC-10 to allow control of the source from the remote location.

MOUNTING

The SVC-10 can be mounted in standard 19” racks by attaching the included mounting ears. Remove the rubber feet on the bottom of the unit to ensure clearance when inserted into a rack.

3

Image 3
Contents Warranty Specifications typical @ 25OC ± 5OCFrequently Asked Questions OverviewControls and Connections Features Sample System DiagramVCR Wiring Modular Plug T568A