Buffalo Technology TS-HTGL/R5 user manual Disk Management RAID Setup

Page 31

Advanced Settings

Disk Management (RAID Setup)

This page shows your current RAID arrays. You may delete old arrays or create new ones by clicking on the underlined RAID Array # under RAID Array Configuration.

The RAID Scanning Settings set a specific time for the TeraStation to scan and inspect its RAID arrays. It is recommended to set a time where the TeraStations usage will be minimal (perhaps the middle of the night). TeraStation will be significantly slower while the RAID scan occurs. Begin Immediate RAID Scan specifies the TeraStation to run a RAID Scan immediately.

You may also disable RAID Array Error Detection Response from this page. Normally, this is set to automatically shut down the RAID array when an error is detected. Though it is not recommended, you may disable that behavior by selecting Disable.

NOTE: TeraStation has four internal hard drives. Before creating a new RAID array, you may have to delete one or more pre-existing RAID Arrays to clear up the hard drives for your new one. This will destroy all data currently on the disks, so back up any important data before deleting RAID arrays. Whether you want to clear out an old array or create a new one, begin by clicking on the array’s underlined RAID Array #, under Name.

31

Image 31

Contents TS-HTGL/R5 Introduction Table of Contents TeraStation Quick Setup Connect your cables TeraStation Quick Setup TeraStation Quick Setup Installing Software TeraNavigator Setup TeraNavigator Setup Using your TeraStation with a Windows PC To Access TeraStation Data from a PC Accessing TeraStation Data from your PCAccessing TeraStation Data from your PC Accessing TeraStation Data from your PC Using your TeraStation with a Mac Accessing TeraStation Data from a Mac Accessing TeraStation Data from a Mac Accessing TeraStation Data from a Mac TeraStation Expansion TeraStation Layout TeraStation Layout TeraStation Layout Configuration GUI Advanced SettingsAdvanced Settings Advanced Settings Basic Network IP Address Properties Network Workgroup/Domain Disk Management Drive Properties Page Disk Management RAID Setup Disk Management RAID Configuration Advanced Settings Disk Management Disk Check Disk Management RAID Configuration Disk Management USB Settings Disk Management USB hard drive setup Disk Management Disk Check Disk Management Disk Format Shared Folders Add a new Shared Folder Enable Shared Folders Access restrictionsShared Folders Service Setup Shared Folders DFS Setup Add Group ManagementUser Management User Management changing passwords Troubleshooting Multiple Shares Mapping Multiple Shares Disk Backup Disk Backup Edit Backup Job Disk Backup TeraStation List Disk Backup Add TeraStation Maintenance Notification Maintenance UPS Settings Advanced Settings Maintenance Alert Settings Maintenance Status LCD Maintenance Syslog Transfer Maintenance Shutdown Maintenance Initialization System Status System Information System Status USB Details System Status Drive Properties System Status Network Information Log Information System StatusTeraStation Client Utility IP Address Setup Troubleshooting Diag LCD Codes TroubleshootingReplacing a Hard Drive Page Page Page CSMA/CD Technical SpecificationsContact Information North America Contact Information Europe GPL Information North America GPL Information Europe