Cisco Systems 4305G quick start Configuring Video Output

Page 21

8Configuring Video Output

Step 1 In the Settings area, click DMP Display Attributes.

The display autodetection feature is enabled by default. If you are satisfied with the selections and entries that DMPDM made for you, you are done with this section and you can go now to the “Setting Up Centralized Management” section on page 23.

Otherwise, if you are not satisfied, do the following:

a.From the DMP Display Autodetection (requires HDMI) list, select Disable.

b.From the Display Standard list, select the standard that applies in your country. For example, even though our factory default selection is NTSC_M, your country might use PAL instead.

c.From the Interface (DMP display output) list, select the connector type and signal type that you are using. For example, you might use SVIDEO.

If you do not know which options to select, see the manufacturer documentation for your DMP display.

Step 2 From the Color Space list, select the absolute color space that your DMP display uses.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Quick Start Guide for Cisco Digital Media Player 4305G Revised July 10, 2008 Glossary Learn More Checking the Package Contents Environmental Tolerance Ranges Participating in a Dhcp Network Connecting to a DMP Display Page Page Connecting to an AC Socket Checking the LEDs Logging in to Dmpdm and Changing its Passwords Page Page Page Page Page Page Page Configuring Video Output Select Administration Save Configuration Setting Up Centralized Management Select Administration Save Configuration Select Settings Server Settings Learning About the Remote Control for DMPs Page Cisco Systems, Inc
Top Page Image Contents