•If you will connect your DMP to an analog display, do all of the following:
–Plug one yellow jack on the RCA video cable into the CVBS interface on your DMP.
–Plug the 3mm jack on the RCA audio cable into the AUDIO interface on your DMP.
Step 2 Connect the other end of the cable (or cables) to the corresponding interface (or interfaces) on your DMP display.
Step 3 If the DMP display is not already turned on, turn it on now.
5 Connecting to a 100V–240V AC Socket
Warning |
| Use only the supplied power cable and adapter. |
|
| |
Step 1 | Connect the DMP power cable to the AC adapter. | |
Step 2 | Connect the DC barrel connector to the 12V DC power | |
| supply on the DMP chassis. | |
| 11 |