Cisco Systems 4300G quick start Check DMP LEDs, Log In to Dmpdm, Configure Video Output, Plugs

5Connect to 120V AC Socket

Warning	Use only the supplied power adapter
	and plugs.

Step 1 Identify the correct plug type for your region (U.S., E.U., U.K., or Australia), then snap that plug into the AC adapter.

Step 2 Connect the DC barrel connector to the 5V DC power supply on the DMP chassis.

Step 3 Connect to a 120V AC electrical outlet that you know is grounded.

We recommend that you use a surge protector or an uninterruptable power supply from a reputable manufacturer.

We recommend that you change the username and password as soon as possible.

Step 4 From the Color Space list, select the absolute color space that your DMP display uses.

9Identify Trusted DMM-DS

If your DMP will be part of a digital signage

6Check DMP LEDs

The DMP chassis contains a green LED and a red LED. After you attach your DMP to its AC power source, you should see light from both LEDs through the front of your DMP. The lights tell you if your DMP has power and if it has an IP address.

•A solid green LED indicates that a power source is available.

•A solid red LED indicates that your DMP is trying to obtain an IP address. (After your DMP has an IP address, it turns off the red LED.)

The LEDs do not blink.

7Log In to DMPDM

Step 1 When your DMP display shows the Cisco logo and shows an IP address for your DMP, write down the IP address.

Step 2 To log in to DMPDM, point your browser to the IP address that you wrote down.

Step 3 At the login prompt, enter the username admin and the password default.

8Configure Video Output

Step 1 In the Settings area, click Display. You see:

Step 2 From the Display Standard list, select the option that shows the name of the standard that your DMP display uses.

Step 3 From the Display Output Interface list, select the type of video cable that connects to your DMP display. (The default option supports composite/RCA.)

Step 5 If you selected RGB as the color space, select an option from the Color Component Order list to define the order in which to store red, green, and blue data. This definition is sometimes called the left-to-right additive color model.

Step 6 (Optional) Move any or all of the sliders to compensate for DMP display deficiencies in video (brightness, contrast, or saturation) or audio (channel volume).

Step 7 To confirm your selections and to implement them until you change them or until you restart your DMP, click Apply.

Step 8 To test if your selections are suitable ones for your DMP display, click Show IP in the DMP Mode area.

Your DMP display shows a Cisco logo and shows the IP address for your DMP.

Step 9 To make your configuration changes permanent, even after you reboot your DMP, do the following:

a.In the Administration area, click Save Configuration.

b.On the Save Configuration page, click Save.

network that includes multiple DMPs and will be managed centrally, you can specify in DMPDM which one DMM-DS server appliance to trust.

Step 1 In the Settings area, click DMM.

Step 2 In the DMM Host field, enter the IP address of the one DMM-DS server appliance that you trust.

Step 3 In the Timeout (Seconds) field, enter the maximum number of seconds that your DMP should wait for a response from the trusted DMM-DS server appliance.

Step 4 To confirm your selections and to implement them until you change them or until you restart your DMP, click Apply.

Step 5 To make your configuration changes permanent even after you reboot your DMP, do the following:

a.In the Administration area, click Save Configuration.

b.On the Save Configuration page, click Save.