To set up a
1.Press the V Button on the remote. The
2.Use the Arrow buttons on the remote to highlight Settings and press OK. The Settings menu is displayed.
3.Use the Arrow buttons on the
remote to highlight Network and press OK. The Network menu is displayed.
4.Use the Arrow buttons on the remote to highlight
5.Use the Arrow buttons to highlight a wireless network you wish to connect to and press OK or WPS (if available).
6.If required, enter the password.
4
Manual
To manually add a
1.Use the Arrow buttons on the remote to highlight Add Network and press OK. The Add Network menu is displayed.
2.Use the keyboard on the back of the remote to enter the Network SSID you wish to connect to.
3.Use the Arrow buttons on the remote to highlight a type of Security you wish to use and press OK.
4.Use the Arrow buttons on the remote to highlight Connect and press OK. The
To switch to DHCP and STATIC connections:
1.Use the Arrow buttons on the remote to highlight Manual and press OK. The Manual Settings menu is displayed.
2.Use the Arrow buttons on the remote to highlight DHCP Off and press OK. You can now manally enter the IP Address, Subnet Mask, Default Gateway, Preferred DNS Address, and Alternate DNS Address.
49