Secure Wall Plate to Wall, Wood Stud Walls

VIZIO VMT37-60S User Manual

Secure Wall Plate to Wall

Caution: This product is not designed for use in metal stud walls

Wood Stud Walls

Note: You must attach your TV wall mount to a wall that has at least 2” x 4” wood studs to avoid property damage or injury.

A.Locate wall studs

1.Using a stud finder, locate two wood studs that are 16” to 24” apart.

2.With a pencil, mark the location of the studs.

B.Mark and drill holes

1.Tape the included Wall Mount Template to the wall so the holes align with the studs. Hold the wall plate [1] up to the Wall Mount Template and use the built-in level to make sure the Wall Mount Template is level. Put the wall plate [1] aside.

2.Drill 4 holes with the 3/16” drill bit, 2-1/2” deep. Remove the Wall Mount Template.

C.Anchor mount to wall

1.Using a 1/2” wrench or socket, attach the wall plate [1] to the wall with the supplied lag bolts and washers [3] & [4].

2.Use the level before tightening bolts.

Note: It is important to make sure the wall plate is level.

Note: Do not over-tighten lag bolts. Tighten only until they are firmly against the wall plate.