Setting Lens Selection Switch
When lens mounting is completed, set the Lens selection Switch on the side
of the camera according to the mounted lens type. When the mounted lens E is an Auto Iris Lens of the DC control type, set the Lens Selection Switch to
"DC". When the mounted lens is an Auto Iris Lens of the Video control type, set the Lens Selection Switch to "VIDEO".
Back Focus Adjustment
The camera back focus is adjusted at the plant before delivery, but some lenses are out of focus though the number differs in types. If it's the case, you should make the back focus adjustment as follows. First, this is the back focus adjustment procedure for fixed focus lenses.
Lenses without zoom function
①Image an object with high resolution(letticed) at more than 10m distance
and put the lens focus ring in the infinite(∞) position.
➁Rotate the BACK FOCUS control bar until the object is seen best.
➂Tighten the BACK FOCUS control bar fixing screw.
11