VIZIO VW37L HDTV20A User Manual
3.4 DTV / TV Tuner Setup
When you first used your VIZIO VW37L HDTV20A you will have setup your TV for DTV / TV channels using the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV TUNER SETUP menu.
3.4.1 Tuner Mode
When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to display the TV page.
Press the 
button to highlight the Tuner Mode selection.
Press either 
or
button to choose Cable or Air (Antenna) depending upon which equipment you have attached to the DTV / TV Input.
3.4.2 Auto Search
Press the 
button to highlight the Auto Search selection.
Press the 
button to Auto Search for TV channels available. The TV will automatically search for analog and digital channels.
3.4.3 Skip Channel
After the TV has stored all of the available DTV channels in memory you will find that some channels will be too weak to watch comfortably or they may be channels you do not want to see. Select the channel you wish to remove.
Press the MENU and 
buttons to open the TV TUNER SETUP menu.
Press the 
button to highlight SKIP CHANNEL.
Press the
button to select this channel to be skipped when using the CH+ or CH- button. You will still be able to select this channel using the number buttons on the remote control.
Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed.
Version 11/19/2007 | 45 |
| www.VIZIO.com |