Vizio M401I-A3, M401IA3 user manual Using the Network Connection Menu

Setting the Auto Power Off Feature

To help save energy, your TV is set by default to turn off after 10 minutes if no signal is being displayed on the screen.This feature can be deactivated.

To set the Auto Power Off feature:

1.From the TIMERS menu, use the Up/Down Arrow buttons on the remote to highlight Auto Power Off and press OK. The AUTO POWER OFF menu is displayed.

2.Use the Left/Right Arrow buttons on the remote to change whether the TV will turn off. If you don’t want the TV to turn off when there is no signal, change the setting to Off. Otherwise, select 10 min.

3.Press Exit once you are finished.

5

USING THE NETWORK CONNECTION MENU

Your TV is Internet-ready, featuring both an Ethernet port and built-in high-speed Wireless-N.

Connecting to a Wireless Network

To connect to a wireless network whose network name (SSID) is being broadcast:

If your TV is connected to a network with an Ethernet cable, you will not see the wireless network connection menu.You must disconnect the Ethernet cable to set up a wireless network connection.

1. Press the MENU button on the

remote. The on-screen menu
	VIZIO
is displayed.
		NETWORK
2. Use the Arrow buttons on the
	Wired Connection Disconnected
remote to highlight Network	Wireless Access Points
and press OK. The NETWORK
menu is displayed.
3. If you do not see your wireless
network displayed, highlight
	More Access Points
More Access Points and
	WPS
press OK. The More Access
	Manual Setup
Points menu, which is a list of
	Hidden Network
available wireless networks,
	Test Connection
is displayed.
4. Highlight the name of your
wireless network (this is the
network’s SSID) and press OK.
5. Using the on-screen keyboard,
enter your network’s password,
then highlight Connect and
press OK.

6. Press the EXIT button on the remote.

26