VIZIO M260MV User Manual
Connecting a Home Theater System
If your sound system has a S/PDIF (optical) digital audio input you can connect it to the OPTICAL digital audio out on the back of your HDTV. This is active when receiving audio with the content being viewed no matter which input is being used.
1.Connect one end of the optical cable to the optical connection on the Home Theater and the other end to the OPTICAL jack on your HDTV.
2.Turn on the power to your HDTV and Home Theater.
Change the input on your Home Theater to optical. See your Home Theater user manual for more information.
Connecting a Computer
COMPUTER
1.Set computer to a resolution supported by your HDTV. If your computer supports it, we recommend 1920 x 1080. (See Preset PC Resolutions.)
2.Turn off the power to your HDTV and Computer.
3.Connect the VGA cable from your computer to the RGB PC jack on your HDTV.
4.Connect the
5.Turn on the power to your HDTV and computer.
6.Select RGB using the INPUT button on the remote control or side of your HDTV.
Note: Refer to your PC computer user manual for more information about the video output requirements.
Version 6/4/2010 | 25 |
| www.VIZIO.com |