VlZIOM190MV/M220MVUserManual
Chapter 2 Basic Controls and Connections
Front Panel
POWER 'VIZIO'LIGHT--TheVIZIO logo lights white when powered on.
Your HDTV TV features touch-sensitive buttons that light when active. The proximity sensor detects you, and as your hand gets closer to the surface, the intensity of the LEDs increase.
Remote Control Sensor--Point the remote control directly at this window on the lower left corner of your HDTV for the best response to the remote signal.
1.POWER ( _ )--Turn your HDTV on by pressing
the button once. Press the button again to turn your HDTV off.
2.MENU--Pressto launch the on-screen menu. If a
sub-menu is active, this button will proceed to the next level.
3.CH A/VmPress to change the channels up or down. While the menu is active, these buttons function as up and down controls.
4.VOL A/T--Press to increase or decrease the speaker volume. While the menu is active, these buttons function as left and right controls.
5.INPUT (SELECT)--Press to cycle through the various devices connected to your TV (called Inputs). The inputs cycle in the following sequence: TV, AV (Composite), COMP (Component), HDMI-1, HDMI-2, and RGB (VGA). After you have stepped through the entire sequence, you will return to the beginning. If a sub-menu is active, pressing this button will return to the previous menu level. Additionally, when the menu is active, this button confirms the menu function to be adjusted.
10
www.VlZlO.com