Vizio E707I-A3E user manual Vizio

Setting the Tuner Mode

If you are using a device that is connected to the RF input, such as an external antenna or cable TV connection, you must set the tuner mode.

1. Press the MENU button on the remote. The on-screen menu is

displayed.

5

Scanning for Channels

Before the TV can detect and display channels and their associated information, you must scan for channels. A channel scan may also be necessary when the TV has been moved to an area where different free-to-air broadcast television channels are available.

2.	Use the Arrow buttons on the remote to highlight the
	Settings icon and press OK. The Settings menu is displayed.
3.	Highlight Tuner Mode and press OK. The Tuner Mode menu is
	displayed.
4.	Highlight Antenna or Cable and press OK.
5.	Press the EXIT button on the remote.

1.From the Tuner Settings menu, highlight Auto Channel Scan. The auto channel scan begins.

2.Wait until the channel scan is 100% complete. Highlight Done and press OK.

3.Press the EXIT button on the remote.

VIZIO
Channel Scan
Channel Scan
Digital Channels:	0
Analog Channels:	19
18% Complete
Cancel
Press OK to finish

32