VIZIO GV42L HDTV User Manual
4.7 DTV Tuner Setup
When you first used your GV42LHDTV you will have setup your TV for DTV channels using the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV TUNER SETUP menu.
4.7.1 Tuner Mode
When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE ADJUST
page. Press the button to display the TV TUNER SETUP page for DTV.
Press the 
button to highlight the Tuner Mode selection.
Press the button to choose Cable or Air (Antenna) depending upon which equipment you have attached to the DTV / TV Input.
4.7.2 Auto Search
Press the 
button to highlight the Auto Search selection.
Press the button to Auto Search for TV channels available. The TV will automatically search for analog and digital channels.
4.7.3 Skip Channel
After the TV has stored all of the available DTV channels in memory you will find that some channels will be too weak to watch comfortably or they may be channels you do not want to see. Select the channel
you wish to remove, press the MENU and | buttons to open the TV TUNER SETUP menu and then | |
press the | button to highlight SKIP CHANNEL. Press the OK button to select this channel to be | |
skipped when using the CH+ or CH- button. You will still be able to select this channel using the number buttons on the remote control.
4.7.4 Digital Audio Out
When receiving digital audio from the DTV / TV Input, the audio is output on the Optical Digital Audio
connector of the rear of the TV. To configure the output for your Receiver/Amp, press the 
button to highlight the Digital Audio Out selection.
Press the 
button to select Dolby Digital or PCM.
Version 8/1/2006 | 49 |
| www.VIZIOCE.com |