Vizio GV42L FHDTV10A manual Using a Cable or Satellite Remote, Programming for DVD Player

VIZIO GV42L FHDTV10A User Manual

4.19.3Programming for DVD Player

1.Manually turn on the DVD Player.

2.Press the DVD button on the remote control.

3.Press and hold the SET button until the LED LIGHT flashes twice.

4.Find the programming code for your DVD player in the code list in the back of this book and enter it using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is entered.

If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and manufacturer.

5.Point the remote control at the DVD Player and press the POWER button. The DVD Player will turn off.

Note:

a)If your DVD player does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, see “Searching for Component Codes.”

b)Sometimes a code listed will only include limited functions. Try other codes that may include more functionality.

4.19.4 Searching for Component Codes

If you cannot find the manufacturer in the component list or the program code does not work, you can use the remote control to search for the correct component code.

To search for a component code:

1.Turn on the component.

2.Press the matching component button on the remote control.

3.Press and hold the SET button until the LED flashes twice.

4.Press 9 9 1. The LED flashes twice.

5.Point the remote control at the component and then alternate between pressing the POWER

button and the component button on the remote control until the component turns off. If the component still does not respond, clear the component button, then repeat the search procedure.

4.20 Using a Cable or Satellite Remote

Your VIZIO remote uses codes 11758 and 10178 to work your LCD HDTV. To use a cable or satellite remote to work the LCD HDTV, refer to your cable or satellite remote user guide for more information on how to program the remote. If your cable or satellite remote uses a 5-digit code (like most Direct TV units), first try 11758 and then, if that does not work, 10178. If your cable or satellite remote uses a 4- digit code, try 1758 and then 0178 as an alternative. If your cable or satellite remote uses a 3-digit code (Echostar or Dish Network for example), use code 627.

Note: Some buttons may not function as expected on your cable or satellite remote. Typically power, volume and mute will work.

Version 10/9/2007	63
	www.VIZIO.com