Vizio E500AR, E420AR, E320AR, E240AR warranty Completing the First-Time Setup

The first time you turn on the TV, the Setup App will guide you through each of the steps necessary to get your TV ready for use.

Before you begin the first-time setup:

•Your TV should be installed and the power cord should be connected to an electrical outlet.

•Your devices should be connected.

To complete the first-time setup:

1.Press the Power button on the remote. The TV powers on and

the Setup App starts.

2.Use the Up/Down Arrow buttons on the remote to highlight Home Mode Setup and press OK.

3.Use the Up/Down Arrow buttons on the remote to highlight your time zone and press OK.

4.Set up Daylight Saving time. Use the Up/Down Arrow buttons to highlight On or Off and press OK.

Select On when Daylight Saving is in effect.

5.Press OK, then use the Up/ Down Arrow buttons to select Cable or Antenna and press OK.

6.Highlight Being Scan and press OK to start channel scan.

7.When you have finished the channel scan, highlight Exit to Live TV and press OK.

The First-Time Setup is complete.

•Unless otherwise stated, the Menu illustrations in this user guide are based on the E240AR.

•Depending on the input source, the menu items may be different. Unless otherwise stated, the Menu illustrations in this user guide are based on TV input.