Vizio E420VO Installing the Batteries, Remote Control Range, Vizio Remote Control Precautions

VIZIO E420VO User Manual

Chapter 3 VIZIO Remote Control

Installing the Batteries

1.Remove the battery cover.

2.Insert the batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment.

3.Replace the battery cover.

Precautionary Tips for Inserting the Batteries:

∙Do not mix new and old batteries. This may result in cracking or leakage that may cause a fire or lead to personal injury.

∙Inserting the batteries incorrectly may also result in cracking or leakage that may cause a fire or lead to personal injury.

∙Dispose of batteries according to local hazardous waste regulations.

∙Keep the batteries away from children and pets.

Remote Control Range

∙Point the remote control directly at this sensor for the best response to the remote signal.

∙Do not place any obstacles between the remote control and the remote control sensor.

∙The effective range of the remote control is approximately

22 feet (7 meters) from the front of the remote control sensor, 30° to the left and right, 20° up and down.

VIZIO Remote Control Precautions

∙The remote control should be kept dry and away from heat sources. Avoid humidity.

∙If the TV responds erratically to the remote control or does not respond at all, check the batteries. If the batteries are low or exhausted, replace them with fresh batteries.

∙When not using the remote control for a long period of time, remove the batteries.

∙Do not take the batteries apart, heat them, or throw them into a fire.

∙Do not subject the remote control to undue physical stress, such as striking or dropping it.

∙Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.

Version 3/16/2010	15
	www.VIZIO.com